Table of Contents
Advertisement
BLUETOOTH®
Improve the voice quality
While talking on the phone...
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select an item (see the following table), then press
the knob.
3
2
Repeat step
until the desired item is selected or activated.
4
Press and hold
to exit.
To return to the previous setting item, press
MIC GAIN
LEVEL –10 to LEVEL +10 (LEVEL –4): The sensitivity of the microphone increases as
the number increased.
NR LEVEL
LEVEL –5 to LEVEL +5 (LEVEL 0): Adjust the noise reduction level until the least noise
is being heard during a phone conversation.
ECHO CANCEL
LEVEL –5 to LEVEL +5 (LEVEL 0): Adjust the echo cancellation delay time until the
least echo is being heard during a phone conversation.
Make the settings for receiving a call
1
Press
to enter Bluetooth mode.
2
Turn the volume knob to select an item (see the following table), then press
the knob.
3
2
Repeat step
until the desired item is selected or activated.
4
Press and hold
to exit.
To return to the previous setting item, press
SETTINGS
AUTO ANSWER
1 to 30: The unit answers incoming call automatically in the selected time (in seconds). ;
OFF: Cancels.
BATTERY/
AUTO: Shows the strength of the battery and signal when the unit detects a Bluetooth
SIGNAL *
device and the Bluetooth device is connected. ; OFF: Cancels. Date is shown.
* Functionality depends on the type of the phone used.
.
Default: XX
.
Default: XX
Make a call
You can make a call from the call history, phonebook, or
dialing the number. Call by voice is also possible if your
mobile phone has the feature.
1
Press
to enter Bluetooth mode.
"(First device name)" appears.
• If two Bluetooth phones are connected, press
to switch to another phone.
"(Second device name)" appears.
2
Turn the volume knob to select an item (see the
following table), then press the knob.
3
2
Repeat step
until the desired item is selected/
activated or follow the instructions stated on the
selected item.
4
Press and hold
to exit.
To return to the previous setting item, press
CALL HISTORY
(Applicable only if the phone supports PBAP.)
1 Press the volume knob to select a name or a phone
number.
• "INCOMING", "OUTGOING", or "MISSED" is shown on
the lower part of the display to indicate the previous
call status.
• Press DISP to change the display category
(NUMBER or NAME).
• "NO DATA" appears if there is no recorded call
history.
2 Press the volume knob to call.
again
.
17
ENGLISH
Hide quick links:
Advertisement
Table of Contents
