Programmabe Functions Description; System Self-Rearming And Door Locking; Central Door Locking Setting Time; Double Impulse In Opening - Gemini 839 Series Installation And Use Manual

8.0 -
This chapter covers the various features of the system which can be programmed as described in

"SYSTEM PROGRAMMING".

This function allows vehicle's protection in case the user disarms accidentally the system.
Thus, the system will be automatically rearmed after 30", if no intervention on the vehicle is done (i.e.
door opening, engine start).
Together with the system self-rearming, the automatic door locking of the vehicle is done when
running.
Being closed all the doors of the vehicle, turn the ignition key to "ON"; after 20", all doors will be locked.
By turning the ignition key to "OFF", all doors of the vehicle will be automatically unlocked
Function that allows to select the CDL closure time.
This function allows activating the comfort control (window closing) when the system is armed.
This function activates twice the opening control and it is used on vehicles with diversified opening.
This function modifies the alarm input signal (positive or negative) according to the signal deriving
from the door's button.
Do not modify the functions which have been programmed during the installation
!
E ntering the programming procedure resets the functions to the default Setting
The system has a "standard configuration" programmed during manufacturing procedure by Gemini.
For programming modification proceed as follows
!
With the system disarmed and doors closed, turn the vehicle ignition key to "ON" position.
!
The status LED stay on for one second; during this time, push the button on the remote control.
!
Starting of programming procedure is indicated by three flashed of the LED and the turn indicators
and furthermore the LED is permanently illuminated.
!
To able and disable the functions, follow the below table, take into consideration that every
the push button or rotation of the ignition key will cycle to the next feature. The LED will turn off
briefly after each press of the remote and turn off twice after each key rotation
FUCTION
System self-rearming
Setting of opening/closing time (1" or 6")
25" comfort closure
Doors lock double impulse in opening
Selection of doors input polarity
!
Once the last function has been programmed, the system indicates the end of programming
procedure by three flashed of LED and turn indicators.
!
Turn the vehicle ignition key to "OFF" position.
PAGE 08 - INSTALLER MANUAL
PROGRAMMABLE FUNCTIONS DESCRIPTION

8.1 - SYSTEM SELF-REARMING AND DOOR LOCKING

8.2 - CENTRAL DOOR LOCKING SETTING TIME

8.3 - COMFORT CLOSURE CONTROL

8.4 - DOUBLE IMPULSE IN OPENING

8.5 - DOORS PUSH-BUTTONS POLARITY SELECTION

9.0 - SYSTEM PROGRAMMING
:
STATUS BUTTON
Disabled
Selected 1" Enable 6"
Disabled
Disabled
Enabled Enable positive
negative polarity
.
VEHICLE KEY
Enable Disable
Enable 1"
A ttiva D
A ttiva D
Enable positive
polarity
.
.
.
press of
isable
isable