Installing The 2.5 Inch Hard Drive Assembly; Optical Drive; Removing The Optical Drive Assembly - Dell Vostro 3667 Owner's Manual

a Pull one side of the hard drive bracket to disengage the pins on the bracket from the slots on the hard drive [1].
b Lift the hard drive out of the hard drive bracket [2].

Installing the 2.5 inch hard drive assembly

1 Align and insert the pins on the hard drive bracket with the slots on one side of the hard drive.
2 Flex the other side of the hard drive bracket, and align and insert the pins on the bracket into the hard drive.
3 Slide the hard drive assembly into the slot on the computer until it clicks into place.
4 Close the front panel door.
5 Connect the SATA cable and the power cable to the connectors on the hard drive.
6 Install the:
a bezel
b cover
7 Follow the procedure in

Optical drive

Removing the optical drive assembly

1 Follow the procedure in
2 Remove the:
a cover
b bezel
3 To remove the optical drive assembly:
a Open the front panel
b Disconnect the data cable and power cable from the connectors on the optical drive assembly [1, 2].
NOTE:
the cables from the connectors.
c Close the front panel door [3].
d Remove the 6-32xL3.6 screw that secures the optical drive assembly to the computer [4].
e Slide the optical drive assembly out of the computer [5].
12 Removing and installing components
After working inside your computer.
Before working inside your
door.
You may need to unroute the cables from the tabs under the drive cage to allow you to disconnect
computer.