Installing The 3.5 Inch Hard Drive Assembly; Removing The 2.5 Inch Hard Drive Assembly - Dell Vostro 3667 Owner's Manual

Installing the 3.5 inch hard drive assembly

1 Insert the hard drive into the hard drive bracket.
2 Secure the hard drive to the hard drive bracket by using the screws.
3 Insert the hard drive assembly into the slot on the computer until it clicks into place.
4 Close the front panel door.
5 Install the screw that secures the hard drive assembly to the front panel door.
6 Connect the SATA cable and the power cable to the connectors on the hard drive.
7 Install the:
a bezel
b cover
8 Follow the procedure in

Removing the 2.5 inch hard drive assembly

1 Follow the procedure in
2 Remove the:
a cover
b bezel
3 To remove the hard drive assembly:
a Disconnect the hard drive assembly cables from the connectors on the hard drive [1, 2].
b Open the front panel
c Press the blue tabs on both sides [3] and pull the hard drive assembly out of the chassis [4].
4 To remove the hard drive from the hard drive bracket:
After working inside your computer.
Before working inside your
door.
computer.
Removing and installing components 11