System fan
Removing the system fan
1
Follow the procedure in
2
Remove the:
a
cover
b
bezel
3
Open the
front panel
door.
4
To remove the system fan:
a
Disconnect the system fan cable from the connector on the system board [1].
b Remove the screws that secure the system fan to the computer [2].
c
Slide the system fan out of the computer [3].
Installing the system fan
1
Hold the system fan with the cable facing the bottom of the computer.
2
Align the system fan to the screws holders on the chassis wall.
3
Tighten the screws to secure the system fan to the computer.
4
Connect the system fan cable to the connector on the system board.
5
Close the front panel door.
6
Install the:
a
bezel
b
cover
7
Follow the procedure in
System board
Removing the system board
1
Follow the procedure in
2
Remove the:
Before working inside your
After working inside your
computer.
Before working inside your
computer.
computer.
Removing and installing components
21
Need help?
Do you have a question about the Vostro 3667 and is the answer not in the manual?
Questions and answers