Installing the power switch
1
Insert the power switch into the slot from the front of the computer and press it until it clicks into place.
2
Align the cable with the pins on the connector and connect the cable.
3
Close the front panel door.
4
Install the:
a
bezel
b
cover
5
Follow the procedure in
Coin cell battery
Removing the coin cell battery
1
Follow the procedure in
2
Remove the:
a
cover
b
bezel
3
Open the
front panel
4
To remove the coin cell battery:
a
Press the release latch until the coin cell battery pops out.
b Remove the coin cell battery from the connector on the system board.
18
Removing and installing components
After working inside your
Before working inside your
door.
computer.
computer.
Need help?
Do you have a question about the Vostro 3667 and is the answer not in the manual?
Questions and answers