Accessing Mixes - PRESONUS StudioLive CS18AI Owner's Manual

3 Controlling StudioLive RM-series Mixers
3.1 Layers, Filter DCAs, and Mixes
3.1.3

Accessing Mixes

3.1.3.1 Creating Monitor Mixes
4. When you're done making adjustment to the individual channels, press the Group
Masters button again to exit the group and return to the Group Master layer.
Filter DCA Groups can be accessed using the Groups view on
the touchscreen or from the Group Masters layer.
To access any of your RM-series mixer's Flex mixes, simply press the
corresponding Mix button. While active, the faders will control the
selected Flex mix and the Flex Master will control its output.
To access all mix masters, press the Mix Masters button in the
Faders area to make the Mix Masters layer active. The channel
strips now control the master outputs for the 16 flex mixes.
Creating custom monitor mixes is critical. If musicians can't hear themselves or their
bandmates, their performance will suffer. A monitor mix can be mono or stereo.
As an example, let's create a stereo in-ear-monitor mix on Aux 1 and 2.
1. To begin, press the Mix 1 button above the scribble strip. The channel
strips will display each input channel's send level to Aux 1.
2. Press the Select button on the Flex Master fader to select the Aux 1 master.
The Fat Channel will now display the settings for the Aux 1 master send.
StudioLive CS18AI
™
Owner's Manual
28