Routing Monitor Mixes - PRESONUS StudioLive 24R Networking Manual

5 Large Network: Real-world Example
5.4 Analog Output Connections
Digital Patching i
Input Assigned Source Available Source
AVB 41 Main L Sub C
AVB 42 Mix 2 Sub D
AVB 43 Mix 3 Main L
AVB 44 Mix 4 Analog 15 Main R
AVB 45 Mix 5 Solo L
AVB 46 Mix 6 Solo R
Main L
EFFECTS MASTER MASTER CONTROL

Routing Monitor Mixes

5.4.2
3. Select the Available Source column and use the value encoder to scroll to
Main L.
Monitor
Repeat Steps 1-3 to patch Main R, Sub A and FlexMix 1 to AVB Sends 42-44
respectively.
In Section 5.2.3, we routed AVB Sends 1-8 from the StudioLive
24R to the NSB 8.8 on stage. In this section, we will be routing
the appropriate mixes to each AVB Send as follows:
Mix
Monitor Mix 1
(FlexMix 1)
Monitor Mix 2
(FlexMix 2)
Monitor Mix 3
(FlexMix 3)
Monitor Mix 4
(FlexMix 4)
No additional set-up is required. By default, FlexMixes
1-4 are routed to AVB Sends 41-44.
AVB Send NSB 8.8 Output
AVB Send 41 NSB 8.8 Out 1
AVB Send 42 NSB 8.8 Out 2
AVB Send 43 NSB 8.8 Out 3
AVB Send 44 NSB 8.8 Out 4
StudioLive™ Series III
AVB Networking Guide
52