Table of Contents
Advertisement
Resume On PME# [Disabled]
When set to [Enabled], the system enables the PME to generate a wake
event while the computer is in Soft-off mode.
Configuration options: [Disabled] [Enabled]
Resume On PCIE Wake# [Disabled]
Enables or disables the PCI-E and PCI-X to generate a wake-up event.
Configuration options: [Disabled] [Enabled]
Resume On Ring [Disabled]
Allows you to enable or disable the RI to generate a wake event.
Configuration options: [Disabled] [Enabled]
Resume On PS/2 Keyboard [Disabled]
Allows you to disable or enable the PS/2 Power-On by keyboard feature.
This feature requires an ATX power supply that provides at least 1A on the
+5VSB lead. Configuration options: [Disabled] [Enabled]
Resume On PS/2 Mouse [Disabled]
When set to [Enabled], this parameter allows you to use the PS/2 mouse
to turn on the system. This feature requires an ATX power supply that
provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Enabled
Resume On RTC Alarm [Disabled]
Enables or disables the RTC event to wake-up after a power failure.
Configuration options: [Disabled] [Enabled]
The following items appear when Resume to RTC Alarm is set to Enabled.
RTC Alarm Date [15]
To set the alarm date, select this item and press the <+> or <-> key.
Configuration options: [Everyday] [1] [2] [3]... [31]
System Time [12:30:30]
To set the alarm time, select this item and press the <+> or <-> key.
4-26
Chapter 4: BIOS setup
Advertisement
Table of Contents
