Table of Contents
Advertisement
3.
The Create New Array screen shows the disks you can add to make up
the IME volume.
Integrated Mirroring Enhanced (IME) supports three to eight disks, or
seven mirrored disks plus a hot spare disk. Use the arrow key to select
a disk, then move the cursor to the RAID Disk column. To include this
disk in the array, press <+>, <->, or <Space>.
You may also specify the Hot Spare disk here. Select the disk, then
move the cursor to the Hot Spr column, then press <+>, <->, or
<Space>.
LSI Logic Config Utility
Create New Array -- SAS1068
Array Type:
Array Size(MB):
Slot
Device Identifier
Num
0
SEAGATE ST373454SS
1
SEAGATE ST373454SS
2
SEAGATE ST373454SS
3
SEAGATE ST373454SS
Esc = Exit Menu
SPACE/+/- = Select disk for array or hot spare
By default, the RAID Disk field shows No before array creation. This field
is grayed out under the following conditions:
•
•
•
•
4.
Repeat step 5 to add the other disks to the volume.
5.
When done, press <C> to create the array, then select Save changes
then exit this menu.
6.
The utility creates the array.
LSI Logic Config Utility
Processing...may take up 1 minute
Creating RAID array
5-22
0003
0003
0003
0003
F1/Shift+1 = Help
The disk does not meet the minimum requirements for use in a
RAID array.
The disk is not large enough to mirror existing data on the
primary drive.
The disk has been selected as the Hot Spare for the RAID array.
The disk is already part of another array.
Create and save new array?
Cancel Exit
Save changes then exit this menu
Discard changes then exit this menu
Exit the Configuration Utility and Reboot
v6.08.05.00 (2006.08.02)
IME
51498
RAID
Hot
Drive
D i s k
S p r
S t a t u s
[Yes]
[NO]
-------
[NO]
[NO]
-------
[Yes]
[NO]
-------
[Yes]
[NO]
-------
C = Create array
v6.08.05.00 (2006.08.02)
Chapter 5: RAID configuration
Pred
Size
F a i l ( M B )
----
70007
----
70007
----
35003
----
35003
Advertisement
Table of Contents
