5.2.7
Clearing the disk data
You will lose all data when you clear a disk!
To clear the disk data:
1.
From the Array List, use the up or down arrow keys to select a RAID
set, then press <Enter>. The RAID set details appear.
2.
When the array details appear, select the hard disk drive you want to
clear, then press <C>. A confirmation message appears.
3.
Press <Y> to clear the disk data, or press
<N> to cancel. Press <C> to clear disk. The
following confirmation message appears.
For RAID0, clearing one member disk would erase all data in the array.
5-16
Clear disk data?
[Y] Yes
Chapter 5: RAID configuration
[N] Cancel