Child-Proof Lock; Ending The Programe Through Canceling; End Of Programme - Beko DV 1562 X User Manual

C
Laundry may be added or taken
out as much as desired during a
drying process, but as this process
will interrupt drying continuously, it
will extend the programme duration
and increase energy consumption.
Therefore, it is recommended to add
laundry before the drying programme
is started.

Child-proof lock

There is a childproof lock to prevent
any programme interruption due to the
pressing of keys while the programme
is on. The loading door and all keys
except the "On/Off" key on the panel are
deactivated when the child-proof lock is
active.
In order to activate the childproof lock,
press on the "Start/Pause/Cancel"
and "Cancel audio warning" buttons
simultaneously for 3 seconds.
To start a new programme after the
programme is over or to interrupt the
programme, the childproof lock should be
deactivated. To deactivate the childproof
lock, press the same buttons for 3 sec.
C
2 beeps when activating and 1 beep
when deactivating the child-proof lock
is heard.
Ending the programe through
canceling
The programme which is selected first will
keep on going even if the position of the
programme selection button is changed.
A new programme can be selected and
started after "Programme cancel" is
activated in order to change the drying
programme.
To cancel any selected programme;
• Press "Start/Pause/Cancel" button for
about a duration of 3 seconds. The
"Filter cleaning", "Water tank" and
"End/ Anti-creasing" warning LEDs will
light up at the end of this period for
reminding purposes.
A
As the inside of the machine will
be excessively hot when you cancel
the programme while the machine
is running, activate the ventilation
programme to cool it down.
A
If the machine is stopped during any
drying programme, and if the position
of the programme selection knob is
changed, an audio signal will be heard
(if the "Cancel audio warning" function
is not selected).
The machine will not start even if the
"Start/Pause/Cancel" button is pressed,
unless the programme selection knob is
returned to the initial programme. The
paused programme must be cancelled in
order to change the drying programme.

End of programme

The "End/Anti-creasing", "Filter cleaning"
and "Water tank" warning LEDs on the
programme follow up indicator will light
up when the programme comes to an
end. The door can be opened and the
machine becomes ready for a second
cycle.
Press the "On/Off" button to shut down
the machine.
C
A 2-hour anti creasing programme to
prevent laundry from creasing will be
activated if you do not take the laundry
out after the programme has come to
an end.
C
Clean the filter after each drying
(please see, Filter cleaning).
C
Drain the water tank after each drying
(please see, Water tank)
16 - EN