Power Supply - Akai QXA6710 Operator's Manual

English
Top and front panels (See 1 )
1. FUNCTION SELECTOR
- Select source of sound USB/CD, OFF, AM or FM,
2. REMOTE CONTROL SENSORE
- Receive the signal from the remote control.
3. CD DOOR
- Press here to open / close the CD door.
4. DISPLAY
- Show the CD functions.
5. DIAL POINTER WINDOW
- Show the AM/FM dial frequency.
6. CD/USB
Switch between USB and CD mode
7. FM STEREO INDICATOR
- Show the FM stereo indication.
8. PALY MODE
- Repeat, Repeat Album, Repeat All, Random
9. STEREO HEADPHONE JACK
- 3.5mm stereo headphone jack.
10. SKIP
CD/MP3: - skips track backwards or forward.
11. STOP/FOLDER
- Stop CD/MP3/USB playback / Folder +
- Delete program playback.
12. PRESS TO PLAY/PAUSE
- Start or pause CD/USB play.
13. TUNING CONTROL
- Select FM/ AM stations.
14. VOLUME
- Adjusts volume level.
15. USB INTERFACE
- USB input host.
Back Panel (See 1 )
16. SPEAKER TERMINAL
- to connect the speaker wire.
17. .AC MAINS
- Connect the AC power cord to the wall outlet.
18. FM ANTENNA
- To improve FM reception.
CONTROLS
,
Remote Control Handset ( See 1 )
19. CD/USB
Switch either CD or USB mode
20. SKIP /
CD:- skips track backwards or forward.
21.
- Folder up ( MP3 mode)
22.
- Folder down ( MP3 mode)
23. PRESS TO PLAY/PAUSE
- starts or pauses CD play.
24. STOP
- stops CD playbacd; erases a CD program.
25. +10
- selects the CD tracks (+10).
26. PLAY/MODE
- Repeat, Repeat 1, Random
27. -10
- selects the CD tracks (-10).
28. PROG
CD: - programs and reviews programmed
track numbers.
Power Supply Using AC Power
1 . Check if the power voltage, as shown on the
type plate located on the back of the set,
corresponds to your local AC power supply. If it
does not, consult your dealer or service centre
2 . Connect the power cord to the wall outlet. The
power supply is now connected and ready for use.
3 . To switch off completely, unplug the power cord
from the wall outlet.
•Unplug the power cord from the wall outlet to
protect your set during heavy thunderstorms.
•If electric cable is damaged, it must be replaced
by the manufacturer, or by the qualification
persons, in order to avoid a danger.
GB-30

POWER SUPPLY

, /