Video-2 - JVC PD-35DX Service Manual

3.6 BASIC OPERATION OF THE SERVICE MENU MODE [USING REMOTE CONTROL UNIT]
3.6.1 HOW TO ENTER THE SERVICE MENU MODE
(1) Press the [INFORMATION] key and the [MUTING] key of
the REMOTE CONTROL UNIT simultaneously, and the
SERVICE MENU screen of Fig.4 will be displayed.
(2) When the Main Menu is displayed, press any key of the [1]
to [0] key to enter the corresponding menu mode.
*Press any of the [1] to [0] keys before the Service Menu
mode disappears.
(3) Select the service item using the [FUNCTION (UP/DOWN)]
key.
(4) Set the value using the [FUNCTION (+/-)] key.
(5) Press the [OK] key to save the value.
SERVICE MENU SCREEN SERVICE MENU SCREEN
SERVICE MENU
1. IF
3. AUDIO
5. VSM PRESET
7. VNR
9. SHIPPING (OFF)
1-9 : SELECT
3.6.2 HOW TO EXIT THE SERVICE MENU MODE
Press the [INFORMATION] key to exit the Service Menu mode.
3.6.3 SERVICE CONTROL KEY LAYOUT ON THE REMOTE
CONTROL UNIT
MUTING
1 2
1~0
4 5
7 8
0
ZOOM
ZOOM SURROUND VIDEO
INFORMATION
P
TV
FUNCTION-/+
P
TV
2. V/C
4. DD/CM
6. STATUS
8. IP
0. BUS FREE
i : EXIT
Fig.4
3
6
9
PIP
MENU
OK
OK
FUNCTION UP/DOWN
Fig.5
3.6.4 SETTINGS OF THE SERVICE MENUS
3.6.4.1 [1. IF] (VCO adjustment, ATT setting)
[Do not adjust]
3.6.4.2 [2. V/C] (VIDEO setting)
[Do not change settings of items that are not included in the
"ADJUSTMENT PROCEDURE".]
Sets output data to the video circuit.
• [Function (up/down)] key
For scrolling up/down the setting items.
• [Function (+/-)] key
For scrolling up/down the setting values.
3.6.4.3 [3. AUDIO] (SOUND setting)
[Do not adjust]
3.6.4.4 [4. DD/CM] (Panel picture processing setting)
[Do not change settings of items that are not included in the
"ADJUSTMENT PROCEDURE".]
Sets output data to the deflection circuit.
• [Function (up/down)] key
For scrolling up/down the setting items.
DDT01 ... CMT01 ... DDP01 ...
• [Zoom (red)] key
For switching to the next item.
DDT01 CMT01
• [Function (+/-)] key
For scrolling up/down the setting values.
3.6.4.5 [5. VSM PRESET] (PICTURE preset setting)
[Refer to page 1-15.]
3.6.4.6 [6. STATUS]
(The version of software, the aspect, and the state of
debugging are displayed. )
[Setting for this item is not required in servicing]
3.6.4.7 [7. VNR] (Noise reduction setting)
[Do not adjust]
Sets output data to the digital noise reduction circuit.
3.6.4.8 [8. IP] (DIST setting)
[Do not adjust]
Sets output data to the DIST circuit.
3.6.4.9 [9. SHIPPING (OFF)]
[Setting for this item is not required in servicing]
3.6.4.10 [10. BUE FREE]
[Setting for this item is not required in servicing]
CMP01 ...
OSD-G
DDP01 CMP01 OSD-G
(No.52089)1-21
PD-35DX