Table of Contents
Advertisement
Using the TV's menus
VIDEO-2 SET
Set the VIDEO-2 SET correctly according to
the video signal input from the external
device connected to the VIDEO-2 terminal.
If this setting is incorrect, images will not
be displayed.
1 Press MENU T to display the
"MENU 2" menu, then select
"VIDEO-2 SET".
MENU
AUTO SHUTOFF
CHILD LOCK
BLUE BACK
VIDEO-2 SET COMPONENT
SELECT BY
EXIT BY
OPERATE BY -+
D I SPLA Y
2 Set the VIDEO-2 SET according to
the video signal input from the
VIDEO-2 terminal.
If a normal video signal (composite
video signal) is input:
Press the MENU
"VIDEO".
If a component video signal (Y/C
signals) is input:
Press the MENU
"COMPONENT".
2
ON
ON
ON
/
buttons to select
/C
B
/
buttons to select
AUTO CH PRESET
You can automatically preset all TV channels
that can be received by your TV to channels.
1 Press MENU T to display the
"MENU 3" menu, then select "AUTO
CH PRESET".
MENU
AUTO CH PRESET
CHANNEL SKIP
LANGUAGE
MTS STEREO
SELECT BY
OPERATE BY -+
2 Press MENU
The sub-menu is displayed.
TUNER MODE:CABLE AIR
START
SELECT BY
OPERATE BY -+
3 Press MENU
R
or "AIR" .
4 Press MENU T to select "START".
5 Press MENU
CH PRESET function.
"> > >ON SEARCH" is displayed on the
screen.
When all the TV channels that can be
received on your TV have been preset,
the display goes out and the AUTO CH
PRESET function operation is completed.
To stop the AUTO CH PRESET:
Press the MENU
3
ENGLISH
SAP MONO
EXIT BY
D I SPLA Y
/
.
EXIT BY
D I SPLA Y
/
to select "CABLE"
/
to start the AUTO
/
button.
13
Advertisement
Table of Contents
