Troubleshooting; Specifications - Toshiba VC-GC33BSA Owner's Manual

Troubleshooting

Check these following items before applying for service.
Do not attempt to repair it by yourself when the appliance breaks down to avoid an electrical shock,
•
fire or injury.
Problems
Vacuum cleaner
stops during
operation.
Suction power
decreases.
Cord can't fully
rewind or pull out.
The noise becomes
bigger suddenly.
Vacuum cleaner
causes smell
during operation.

Specifications

Model No.
Rated Voltage
Rated Frequency
Max Input Power
IEC Input Power
Power Cord Length
Dust Capacity
Dimensions
Net Weight
• Hose (1pcs)
• Telescopic Wand (1pcs)
• Floor Head (1pcs)
Accesssories
• Round Brush (1pcs)
• Futon Brush (1pcs)
• Crevice Nozzle (1pcs)
• Connecting Pipe (1pcs)
Vacuum cleaner complies with the standards: IEC 60335-1, IEC 60335-2-2
Vacuum cleaner belongs to class Ⅱ appliance.
Vacuum cleaner suits for household and similar cleaning only. Do not use it outdoors or for other non-cleaning purpose.
141114c1_VC-GC33BSA.indb 31
Possible Cause
● Thermal protector activates.
● If the appliance is used in high temperature
or used constantly for a very long time,
thermal protector would activates.
● Unplugged the socket outlet.
● Power swith is off.
● Accessories are blocked up.
● Pleat filter is dirty.
● The operation mode LED is twinkling.
● Cord doesn't wind properly.
● Cord is twisted.
● Hose, telescopic wand or floor head is
blocked up.
● Pleat filter is blocked up and the safety
valve opens.
● Trash mildews.
VC-GC33BSA
240V
50Hz
1100W
950W
5m
0.25L
L310×H255×W220
2.8kg
Possible solution
The suction inlet or air vent may be blocked
up. Check and remove the obstruction. Reuse
it after a while (around one hour).
Plug in firmly.
Press or to start the vacuum cleaner.
Disconnect the electrical supply → Unplug →
Dismount the accessories → Remove the trash
Clean the pleat filter.
Press switch to change to the max power.
Pull it out one or two meters and wind it up
again.
Pull out and wind the cord repeatedly while
pressing the cord rewind button.
Remove the trash.
Clean the pleat filter and restart the vacuum
cleaner.
Clean the pleat filter and dust cup.
31
2014/11/14 16:00:56