Download Print this page

Advertisement

MONITOR WITH DVD RECEIVER
MONITOR CON RECEPTOR DE DVD
MONITEUR AVEC RÉCEPTEUR DVD
KW-ADV65BT/KW-AV61BT/
KW-AV61
This instruction manual is used to describe models listed below.
• Region 1 (DVD Region Code 1 area)/Region 4 (DVD Region Code 4 area)
En este manual de instrucciones se describen los modelos listados a continuación.
• Región 1 (DVD Código de región Área 1)/Región 4 (DVD Código de región Área 4)
Ce mode d'emploi est utilisé pour décrire les modèles de la liste ci-dessous.
• Région 1 (zone de code de région DVD 1)/Région 4 (zone de code de région DVD 4)
For canceling the display demonstration, see page 7.
Para cancelar la demonstración en pantalla, consulte la página 7.
Pour annuler la démonstration des affichages, référez-vous à la page 7.
For installation and connections, refer to the separate manual.
Para la instalación y las conexiones, refiérase al manual separado.
Pour l'installation et les raccordements, se référer au manuel séparé.
MODE D'EMPLOI
INSTRUCTION MANUAL
MANUAL DE INSTRUCCIONES
For customer Use:
Enter below the Model No. and
Serial No. which are located on
the top or bottom of the cabinet.
Retain this information for future
reference.
Model No.
Serial No.
GET0884-001A
[J/JW]

Advertisement

   Also See for JVC KW-AV61

   Summary of Contents for JVC KW-AV61

  • Page 1

    MONITOR CON RECEPTOR DE DVD MONITEUR AVEC RÉCEPTEUR DVD KW-ADV65BT/KW-AV61BT/ KW-AV61 This instruction manual is used to describe models listed below. • Region 1 (DVD Region Code 1 area)/Region 4 (DVD Region Code 4 area) En este manual de instrucciones se describen los modelos listados a continuación.

  • Page 2

    Location : Top plate different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV For KW-AV61BT Region 4/KW-AV61 Region 4 : technician for help. The marking of products using lasers The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1.

  • Page 3: How To Reset Your Unit

    • This manual mainly explains operations using the buttons on the monitor panel and touch panel. For operations using the remote controller (RM-RK256: supplied only for KW-ADV65BT/KW-AV61BT Region 4/ KW-AV61 Region 4 ), page 62. • < > indicates the variable screens/menus/operations/settings that appear on the touch panel.

  • Page 4: Table Of Contents

    Settings for Bluetooth mobile phones ....59 Setting iPod control mode ........27 Using the Bluetooth audio player ......60 Selecting preference settings for iPod/iPhone Bluetooth operations for KW-AV61 ..61 playback .............. 27 Using the Bluetooth mobile phone ..... 61 iPod/iPhone playback operations for <Head>...

  • Page 5: Introductions

    Cautions • Hold the monitor panel securely so as not to drop it accidentally. • Fit the monitor panel onto the attaching plate until it is firmly locked. Detaching Attaching Turn off the power before detaching the monitor panel. page 9)

  • Page 6: Component Names And Functions

    Screen (touch panel) Monitor panel 1 Loading slot 5 VOLUME/ATT knob. ( page 9) 2 0 (Eject) button • Attenuates the sound. (Press) Ejects the disc. • Adjusts the audio volume. (Turn) 3 HOME/DISP OFF button 6 Remote sensor 7 Reset button •...

  • Page 7: Initial Settings

    When you power on the unit for the first time or reset Language Select the text language used the unit, the initial setting screen appears. for on-screen information. • You can also change the settings on the <Settings> page 48 ) screen.

  • Page 8: Setting The Clock

    Display the <HOME> screen. Set the clock time. On the source control screen: To synchronize the clock time with FM RBDS Display the <Settings> screen. To set the clock manually Display the <Time Set> screen. 1 Select the time display format 2 Adjust the hour 3 Adjust the minute Finish the procedure.

  • Page 9: Common Operations

    Turning on the power Turning off the screen (Hold) The screen is turned off. Turning off the power • You can also turn off the screen on the <HOME> screen. (Hold) Adjusting the volume To adjust the volume (00 to 50) Decrease Increase To turn on the screen...

  • Page 10: Turning On/off The Av Source

    Turning on/off the AV source Touch screen operation You can activate the AV function by selecting source on A Displays the video control menu while <HOME> screen. playing a video. B Displays the source control screen while playing a video. Goes to the previous Goes to the next To turn off the AV source...

  • Page 11: Switching Screens

    Source control screen Common operating buttons Displays the screen of App from the connected iPod touch/iPhone. ( page 30) Displays the phone control screen. page 56) Displays the sound adjustment screen. page 39) Activates/deactivates TA standby reception mode. ( page 16) •...

  • Page 12: Av Source Operations

    AV Off page 10) Turns off the AV source. Only for KW-ADV65BT/KW-AV61BT Region 1/KW-AV61 Region 1 . For KW-AV6 1: Appears only when <AV Input> is set to [BT]. ( page 47) Appears only when <AV Input> is set to [AV-IN]. ( page 47) Appears only when <AV Input>...

  • Page 13: Listening To The Radio

    Preparation: Select the appropriate tuner channel interval for <Area Setting>. ( page 15) DX/LO indicator Standby reception indicator ST/MO indicator The station frequency currently Preset no. tuned in/PS (station name) for FM RBDS when PS signal is coming in Band PTY code for FM RBDS Preset list page 16...

  • Page 14

    When an FM stereo broadcast is hard to When the FM reception is interfered... receive... Activate monaural mode for better reception. Auto Increases the tuner selectivity to reduce interference noises between adjacent stations. (Stereo effect may be lost.) Activate monaural mode to improve FM reception, but the stereo effect will be Wide Subject to the interference from lost.

  • Page 15: Manual Presetting

    Select this when using in South American countries where FM interval is 50 kHz. AM interval is set to 10 kHz. • The initial setting is <US> for KW-ADV65BT/ KW-AV61BT Region 1/KW-AV61 Region 1 , and (Hold) <SA> for KW-AV61BT Region 4/KW-AV61 Region 4 .

  • Page 16

    Selecting a preset station Activating/deactivating TA Standby Reception TP indicator Also changes preset stations TP indicator TA Standby Reception The following features are available only for FM RBDS stations. Lights up The unit will temporarily switch to Traffic Announcement (TA) if Searching for FM RBDS program—...

  • Page 17: Disc Operations

    Playing a disc • If a disc does not have any disc menu, all tracks on it will be played repeatedly until you change the source or eject the disc. Inserting a disc Ejecting a disc Label side • You can eject a disc when playing another AV source. •...

  • Page 18: Playable Disc Types

    It is possible to play back finalized +R/+RW (Video format only) discs. “DVD” is selected as its disc type when a +R/+RW disc is loaded. +RW double layer discs are not playable. Playable only for KW-ADV65BT/KW-AV61BT Region 1/KW-AV61 Region 1 . This unit cannot play back contents protected with CPRM (Content Protection for Recordable Media).

  • Page 19: Playback Operations

    Playback operations • When the operation buttons are not displayed on the screen, touch the area shown on the illustration. For DVD/DVD-VR/VCD/DivX/MPEG1/MPEG2/JPEG Playing time Playback mode Audio format page 22) Media type DISC IN indicator Video format/ Playback status video playback (3: play / 8: pause / 7: stop) mode—VIDEO/ VR-PRG (program)/...

  • Page 20

    For CD/MP3/WMA/WAV Playing time Playback mode ( page 22) Playback status (3: play / 8: pause ) DISC IN indicator Audio format Media type • MP3/WMA/WAV: Folder no./Track no. • CD: Track no. While playing, the jacket picture is Track/file information shown if the file has the tag data •...

  • Page 21

    Video menu operations [Top Menu] Displays the disc menu (DVD)/original program (DVD-VR). You can display the video menu screen during video playback. Displays the menu/playlist/original • Available items on the screen differ depending on the program/scene selecting screen. types of the loaded disc and playback files. below) •...

  • Page 22

    Only for VCD Selecting playback mode For DVD/DVD-VR Selects Repeat playback mode For VCD (without PBC)/CD/DivX/MPEG1/MPEG2/MP3/ WMA/WAV Selects Random Selects Repeat playback mode* playback mode* Direct selecting buttons ( below) * You cannot activate the repeat mode and the random [Zoom] Displays the picture size selecting mode at the same time.

  • Page 23: Settings For Disc Playback

    Audio Language Select the initial audio language; Initial English ( page 67). Subtitle Select the initial subtitle language or erase the subtitle (Off) . • Initial for KW-ADV65BT/KW-AV61BT Region 1/KW-AV61 Region 1 : Off, for KW- AV61BT Region 4/KW-AV61 Region 4 : English ( page 67) Down Mix When playing back a multi-channel disc, this setting affects the signals reproduced through the FRONT OUT/REAR OUT jacks .

  • Page 24: Usb Operations

    • Do not use a USB device with 2 or more partitions. • Depending on the shape of the USB devices and * Except for MPEG2 files recorded by JVC Everio connection ports, some USB devices may not be camcorder (extension code <.mod>).

  • Page 25

    • When the operation buttons are not displayed on the screen, touch the area shown on the illustration. • To change settings for video playback, page 43. Playback mode ( below) Audio format Playing time Playback status (3: play / 8: pause) Video format—...

  • Page 26: Listening To The Ipod/iphone Device

    • To use App of iPod touch/iPhone (such as MotionX-GPS Drive), page 30. • To listen to Pandora, page 32. Preparation Setting <AV Input> for iPod/iPhone iPod/iPhone that can be connected to this unit: playback Made for – iPod with video Select an appropriate input setting for <AV Input>...

  • Page 27: Setting Ipod Control Mode

    [iPod] ( page 26) only for the following iPod/iPhone may not be performed correctly or as intended. In models: this case, visit the following JVC web site: <http:// – iPod nano (6th Generation) www3.jvckenwood.com/english/car/> (English – iPod touch (4th Generation) website only) –...

  • Page 28: Ipod/iphone Playback Operations For Mode

    iPod/iPhone playback operations for <Head> mode • When the operation buttons are not displayed on the screen, touch the area shown on the illustration. • To change settings for video playback, page 43. • Select “iPod” as the source. ( page 12) •...

  • Page 29: Ipod/iphone Playback Operations For

    Selecting an audio/video file from iPod/iPhone playback the menu operations for <iPod Out> mode • Connect the iPod/iPhone using KS-U30 (separately purchased). ( Installation/Connection Manual) • Select [iPod] for <AV Input>. ( page 26) Select the menu (audio or video) (1), a •...

  • Page 30: Using An App Of Ipod Touch/iphone

    Installation/Connection Manual) • Select [iPod] for <AV Input>. ( page 26) • For Apps you can use on this unit, visit <http://mobile.jvc.com >. • When you use an App of the iPod touch or iPhone, Start App on your iPod touch/iPhone.

  • Page 31

    To view the screen of App Select [iPhone] for <Input> on the On <HOME> screen: <Navigation Input> screen. On source control screen: • When <Input> is set to [iPhone], the [Apps] button is shown on the <HOME> screen, and the ] button is shown on the source control screen.

  • Page 32: Pandora® Operations For Kw-adv65bt/ Kw-av61bt Region 1/ Kw-av61 Region 1

    KW-ADV65BT/KW-AV61BT Region 1/KW-AV61 Region 1 Preparation Install the latest version of the Pandora application on your iPhone/iPod touch/Android/BlackBerry. • You can operate Pandora using the remote controller. Only playing, pausing, and skipping are available. Station name/Playing time Playback status ( 3: play/8: pause) Track information •...

  • Page 33

    Adding a station from the <Genre List> to Requirements for Pandora® the <Station list> iPhone or iPod touch • Use an Apple iPhone or iPod touch running under The screen shows the genres sent by the connected iOS3 or later. device.

  • Page 34: Using Other External Components

    • When the operation buttons are not displayed on the screen, touch the area shown on the illustration. • To change settings for video playback, page 43. AV-IN name* ( below) Source type (“AV-IN” or “Front AUX”) [Mode]* Changes the AV-IN name. •...

  • Page 35: Listening To The Siriusxm™ Radio For

    ™ for KW-ADV65BT/KW-AV61BT Region 1/KW-AV61 Region 1 Before operating, connect the SiriusXM Connect Vehicle Tuner (not supplied) to the expansion port on the rear of the unit. ( Installation/Connection Manual) Everything worth listening to is on SiriusXM, getting over 130 channels, including the most commercial-free music, plus the best sports, news, talk and entertainment.

  • Page 36

    Displaying the information on the Selecting a preset channel current channel Also changes preset channels Selecting a channel on the list Select a category (1), and then select a channel (2). Current channel no./ Hides the text information Current category channel name Text information Scrolls the text information...

  • Page 37: Setting The Reception Restrictions

    Setting the reception restrictions Setting the parental lock Activating the parental lock You can set the parental lock in order to, for example, On <Mode> screen: restrict children from receiving adult channels. Setting the parental code • The initial setting is “0000.” •...

  • Page 38

    • To cancel the selection, select the locked channel Skipping unwanted channels again in Step . The icon disappears and the If you do not want to receive some channels, you can selection is canceled. skip them. • When you try to receive a channel with the parental Setting the channel skipping lock activated, the parental code input screen appears and you cannot receive the channel until you...

  • Page 39: Sound Adjustment

    Using the sound equalization • The adjustment is memorized for each source until you adjust the sound again. If the source is a disc, the adjustment is stored for each of the following categories. – DVD/DVD-VR/ VCD – CD – DivX/MPEG1/MPEG2/MP3/WMA/WAV •...

  • Page 40: Adjusting Sound Precisely

    Adjusting the sound precisely Adjusting the crossover Perform steps and of “Selecting a frequency preset sound mode,” then... On <HOME> screen: Select a band. Adjust the sound. Select the item to adjust, then make adjustments. Adjusts the crossover for front or rear speakers (high pass filter).

  • Page 41: Changing Display Design

    You can change the background, the color of text, touch panel buttons, and monitor panel buttons. On <HOME> screen: 2 Select/ the color adjust Color palette Dimmer setting: You can make selections for each dimmer setting—[ ] (Dimmer On) or [ (Dimmer Off).

  • Page 42

    Using your favorite scene as the Capture the image displayed on the background screen. While playing a video or JPEG, you can capture an image and use the captured image as a background. • You cannot capture copyrighted content and image from iPod/iPhone.

  • Page 43: Setting For Video Playback

    You can change the setting for video playback. Adjusting the picture Adjust the picture (–15 to +15). You can adjust the picture quality. Display the adjustment menu. Adjusts the brightness Adjusts the contrast Adjusts the blackness Adjusts the color Adjusts the tint * Adjusts the detail * Adjustable only when the incoming signal is NTSC.

  • Page 44: Changing The Aspect Ratio

    Changing the aspect ratio Zooming the picture You can change the aspect ratio for video playback. You can zoom the picture (<Full>, <Zoom1> to <Zoom3>). • When <Aspect> is set to <Panorama> or <Auto> ( the left column), the picture is zoomed with the aspect ratio of the <Full>...

  • Page 45: Using A Rear View Camera

    The rear view screen is displayed when you shift the gear to the reverse (R) position. To erase the rear view screen • For KW-ADV65BT/KW-AV61BT Region 1/KW-AV61 Region 1 : To erase the caution message, touch the screen.

  • Page 46: Setting Menu Items

    • When changing settings for <Amplifier Gain>, <AV Input>, and <Input> in <Navigation Input>, turn off the AV source . Other settings can be changed when the AV source is turned on. Menu item Selectable setting/item Initial: Underlined Fader/Balance Fader : Adjust the front and rear speaker output balance. F6 to R6;...

  • Page 47

    To change the setting, turn off the AV source by pressing [AV Off] on the <HOME> screen beforehand. <AV Input> can be changed only when <Input> in <Navigation Input> is set to [Off]. The initial setting is [iPod] for KW-ADV65BT/KW-AV61BT Region 1/KW-AV61 Region 1, and [AV-IN] for KW-AV61BT Region 4/KW-AV61 Region 4.

  • Page 48

    • Press [Enter] to display the information. • To return to the previous screen, press [OK]. System Information Displays the version information on the software. You can update the software. ( page 50) Only for KW-ADV65BT/KW-AV61BT. Only for KW-ADV65BT/KW-AV61BT Region 1/KW-AV61 Region 1.

  • Page 49: Memorizing/recalling The Settings

    Memorizing/recalling the settings You can memorize the following settings: • Settings on the <Settings> screen: Fader/Balance, Equalizer, Loudness, Crossover (HPF/LPF/SW Level settings), Volume Adjust, Speaker Select, Dimmer, Display Design , AV Input, Camera Input • Settings for “AV-IN”: AV-IN Name Memorizing your settings Recalling your settings •...

  • Page 50: Updating The System

    Updating the system Adjusting the touch position You can update the system by connecting a USB device You can adjust the touch position on the touch panel if containing an update file. the position touched and the operation performed do not match.

  • Page 51: Bluetooth Operations

    Bluetooth version of the receive more information about Bluetooth, visit device. the following JVC web site: <http://www3. • This unit may not work for some Bluetooth devices. jvckenwood.com/english/car/> (English website • Connecting condition may vary depending on only) circumstances around you.

  • Page 52: Registering New Bluetooth Device

    Connecting Bluetooth devices Registering a new Bluetooth device Pairing a Bluetooth device using SSP (for Bluetooth 2.1) When you connect a Bluetooth device to the unit When the Bluetooth device is compatible with for the first time, make pairing between the unit Bluetooth 2.1, pairing request is sent from an available and the device.

  • Page 53

    When pairing is complete, the device is listed on <Connect Device>. To use the paired device, connect the device on <Connect Device> the right column). * Only for KW-ADV65BT/KW-AV61BT Region 1/KW-AV61 A confirmation message appears. Press [Yes]. Region 1 .

  • Page 54: Setting Up Bluetooth

    52) • Touch the current PIN code, enter a new PIN code, then press [Save]. Device Name Shows the device name to be shown on the Bluetooth device—JVC Unit. Device Address Shows the MAC address of the unit. Auto Connect : The connection is automatically established with the last connected Bluetooth device when the unit is turned on.

  • Page 55: Using The Bluetooth Mobile Phone

    Using the Bluetooth mobile phone Receiving a call Adjusting the volume of microphone When a call comes in... While talking... Status of the device/Battery reminder (only when the Call information information comes from the device) (if acquired) • This adjustment does not affect the volume level of the other sources.

  • Page 56: Making A Call

    Making a call Direct number entry Deletes last entry On the source control screen: Hold: Adds “+” • You can also display the phone control screen by Presets the entered phone number on pressing [ Phone] on the <HOME> screen. the preset list ( page 58) •...

  • Page 57

    Using the preset list/phone book/call lists Select the initial. Preset From preset list From dialled call list. From received call list. Displays the other letters From missed call list. Select a phone number from the list. From phone book. • For copying the phone book, page 58.

  • Page 58

    Presetting the phone numbers Copying the phone book You can preset up to 6 phone numbers. You can copy the phone book memory of a mobile phone into the unit (up to 400 entries). On the source control screen: On the source control screen: Select an item from phone book/call lists.

  • Page 59: Settings For Bluetooth Mobile Phones

    Deleting the phone number entries About mobile phones compatible with in the unit Phone Book Access Profile (PBAP) If your mobile phone supports PBAP, you can Display the preset list/phone book/call display the phone book and call lists on the touch list you want to delete.

  • Page 60: Using The Bluetooth Audio Player

    Using the Bluetooth audio player • To register a new device, page 52. • To connect/disconnect a device, page 53. Status of the device/Battery reminder Playback mode * below) (only when the information comes Track no./Playing time from the device) Playback status (3: play / 8: pause) page 51...

  • Page 61: Bluetooth Operations For Kw-av61

    for KW-AV6 1 For Bluetooth operations, it is required to connect the Bluetooth adapter, KS-BTA100 (separately purchased) to the LINE IN terminals on the rear of the unit. ( Installation/Connection Manual) • KS-BTA100 is not available in some countries. Please contact your dealer where you purchased this unit. •...

  • Page 62: Reference

    For KW-AV61BT Region 1/KW-AV61 Region 1 : To use the remote controller, purchase RM-RK252P separately. If the effectiveness of the remote controller Installing the batteries decreases, replace the batteries. R03/LR03/AAA Before using the remote controller: • Aim the remote controller directly at the remote sensor on the unit.

  • Page 63

    Button Operations Button Operations • Adjusts the volume level. Confirms selection. VOL +/VOL – • “2nd VOL” function does not Does not function for this unit. OSD/ work for this unit. Does not function for this unit. DUAL/ SOURCE Selects the source. SHIFT Functions with other buttons.

  • Page 64

    Searching for an item directly Various disc operations Tuner frequency Using the disc menu 1 Press DIRECT while holding SHIFT to enter the • DVD-Video/DVD-VR search mode. 1 For DVD Video, press TOP M or MENU. 2 Press number buttons while holding SHIFT to enter For DVD-VR, press...

  • Page 65: Maintenance

    Caution on cleaning the unit To keep discs clean Do not use any A dirty disc may not play correctly. solvent (for If a disc does become dirty, wipe it with a example, thinner, soft cloth in a straight line from center to benzine, etc.), edge.

  • Page 66: More About This Unit

    • This unit can play back files with the extension code Playing DivX files (for discs only/for KW- <.mp3>, <.wma>, or <.wav> (regardless of the ADV65BT/KW-AV61BT Region 1/KW-AV61 letter case—upper/lower). Region 1 only) • This unit can play back the files meeting the •...

  • Page 67

    Sound signals emitted through the rear terminals Through the analog terminals (Speaker out/REAR OUT/FRONT OUT ) 2-channel signal is emitted. When playing multi-channel encoded disc, multi-channel signals are downmixed. Language codes (for DVD/DVD-VR language selection) Code Language Code Language Code Language Code Language...

  • Page 68

    Only for KW-ADV65BT/KW-AV61BT • The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by JVC KENWOOD Corporation is under license. Other trademarks and trade names are those of their respective owners.

  • Page 69: Troubleshooting

    Pairing between the unit and Bluetooth device has failed. Register the device again. ( page 52) “Pandora upgrade required”* The Pandora application on your iPhone/iPod touch/Android/BlackBerry is not the latest version. Update the application. Only for KW-ADV65BT/KW-AV61BT. Only for KW-ADV65BT/KW-AV61BT Region 1/KW-AV61 Region 1.

  • Page 70

    • Add appropriate extension codes to the file names. Tracks are not played back as you have Playback order may differ from the one played back using intended them to play. other players. For KW-AV61BT Region 1/KW-AV61 Region 1: Purchase RM-RK252P separately. Only for KW-AV6 1.

  • Page 71

    Select [iPod] for <AV Input>. ( page 47) • Videos cannot be played. • Connect with USB Audio and Video cable JVC KS-U30. • No sound of videos come out. Other cables cannot be used. • Select [iPod] for <AV Input>. ( page 47) No picture appears on the screen.

  • Page 72

    Symptom Remedy/Cause “No Signal” appears on the screen. Make sure the SiriusXM radio antenna is mounted outside the vehicle. Move vehicle to an area with a clear view of the sky. “Check Antenna” appears on the screen. • Check the SiriusXM radio antenna connection, and make sure the antenna is firmly attached to the tuner.

  • Page 73

    Symptom Remedy/Cause Phone sound quality is poor. • Reduce the distance between the unit and the Bluetooth mobile phone. • Move the car to place where you can get a better signal reception. The sound is interrupted or skipped while •...

  • Page 74: Specifications

    Power Output 20 W RMS × 4 Channels at 4 Ω and ≤ 1% THD+N Signal-to-Noise Ratio 80 dBA (reference: 1 W into 4 Ω) Load Impedance 4 Ω (4 Ω to 8 Ω allowance) Equalizer Control Range Frequencies Low: 60 Hz, 80 Hz, 100 Hz, 150 Hz Mid: 500 Hz, 1 kHz, 1.5 kHz, 2 kHz High: 10 kHz, 12.5 kHz, 15 kHz, 17.5 kHz Level...

  • Page 75

    USB Standards USB 2.0 Full Speed Data Transfer Rate Full Speed Maximum 12 Mbps Low Speed Maximum 1.5 Mbps Compatible Device Mass storage class Compatible File System FAT 32/16/12 Max. Current DC 5 V Version Bluetooth 2.1+EDR certified Output Power +4 dBm Max.

  • Page 76

    nh ng qu c gia mà b n có th s d ng ch c n ng Bluetooth ®...

  • Page 77

    Andorra Ireland Sverige Éire Singapore India Australia Singapura Österreich Ísland Slovenija Bosna i Hercegovina Italia Slovensko Belgien Belgique Lichtenstein Türkiye България Lietuva Brasil Luxemburg Canada United States of America Luxembourg Venezuela Schweiz Lëtzebuerg Suisse Vietnam Latvija Vi t Nam Chile Monaco South Africa Κύπρος...

  • Page 78

    Call 1-800-252-5722...

  • Page 79

    . Si su vehículo no posee este sistema, será necesario un inversor de tensión, que puede ser adquirido en los concesionarios de JVC de equipos de audio para automóviles. • NO instale ningún receptor o tienda ningún cable en una ubicación donde;...

  • Page 80

    Si tiene alguna pregunta o necesita información acerca de las herramientas para instalación, consulte con su concesionario de JVC de equipos de audio para automóviles o a una compañía que suministra tales herramientas. • Si no está seguro de poder instalar la unidad correctamente, déjela en manos de un técnico cualificado.

  • Page 81: Electrical Connections

    Antes de extraer la unidad, libere la sección trasera. Desmonte la placa de guarnición. Desmonte el panel del monitor Inserte las dos llaves de extracción y, a (consulte la página 5 del continuación, extráigalas de la manera MANUAL DE INSTRUCCIONES). indicada en la ilustración para que la Llaves de extracción unidad pueda desmontarse.

  • Page 82

    Al conductor remoto del otro equipo (200 mA máx.) Naranja con rayas blancas Al interruptor de control de las luces del automóvil Marrón Conexión del adaptador Bluetooth (Sólo para KW-AV61) Azul claro con rayas amarillas Al adaptador para control remoto OE * Blanco con rayas negras...

  • Page 83

    Cámara de reprovisión Videocámara etc. Cable USB 2.0 (accesorio del iPod/iPhone) / • , conecte el iPod/iPhone mediante el JVC KS-U30 (en venta por separado); de lo contrario, no aparecerá video en la pantalla. • conecte el iPod/iPhone mediante un cable USB 2.0 (accesorio del iPod/ iPhone).

  • Page 84

    Micrófono Si es necesario, asegure el cable del micrófono Cinta adhesiva por medio de abrazaderas (no suministradas). KS-BTA100 Azul con rayas blancas Al cable azul con rayas blancas del mazo de cables suministrado Tierra Negro Marrón Al cable marrón del mazo de cables suministrado Consulte la página 61 del MANUAL DE INSTRUCCIONES.

  • Page 90

    JVC dealer. et vendu par un detaillant JVC autorise. Adresse du Proprietaire· ..Street JVC warrants that this JVC product is free, under JVC vous garantit que ce produit est degage, sous Apt. App. normal use and maintenance,...

This manual also for:

Kw-av61bt

Comments to this Manuals

Symbols: 0
Latest comments:
  • ramana reddy Nov 29, 2015 05:50:
    check wiring connection then reset unit