JVC KW-V230BT Instruction Manual page 45

BLUETOOTH BLUETOOTH
Direct number entry
You can enter up to 31 numbers.
• Press [ ] to delete the last entry.
• Press and hold [0/+] to add "+" to the phone
number.
Voice dialing
• Available only when the connected mobile phone
has a voice recognition system.
1
Activate voice dialing.
On the phone control screen:
• When iPhone is connected, Siri is activated.
• You can also activate voice dialing as follows:
– For KW-V230BT/KW-V235DBT: Hold FNC/
on the monitor panel
– For KW-V330BT: Hold HOME/ on the
monitor panel or select [ ] on the pop-up
short-cut menu (Page 11).
2
Say the name of the person you want to
call.
• If the unit cannot find the target, the following
screen appears. Press [Start], then say the
name again.
To cancel voice dialing: Press [Cancel].
❏ Presetting phone numbers
You can preset up to 5 phone numbers.
1
Display the phone control screen.
(Page 43)
2
Select phone book or call history.
3
Select a phone number to preset.
The preset list is displayed.
4
Select a preset number to store into.
• To display the preset list, press [
control screen. (Page 43)
• To delete preset phone number, press [
besides the phone number on the preset list.
(Hold)
] on the phone
]
ENGLISH 45