Omron CPM1A Manual page 8

Transistor Outputs (Sinking)
Specifications
Item
CPM1A-
10CDT-j(-V1)
+10%
Max.
24 VDC
switching
capacity p y
0.9 A/Unit
Leakage 0.1 mA max.
current
Residual 1.5 V max.
voltage
ON delay 0.1 ms max.
OFF delay OUT01000/01001: 0.2 ms max. (load current: 100 to 300 mA)
Other than OUT01000/01001: 1 ms max. (load current 5 to 300 mA)
Fuse V1 CPUs: No fuse
Expansion I/O Units and Pre-V1 CPUs. 1.25 A/common (cannot be replaced by the user)
Circuit
configuration
Transistor Outputs (Sourcing)
Specifications
Item
CPM1A-
10CDT1-j(-V1)
+10%
Max.
24 VDC
switching
capacity p y
0.9 A/Unit
Leakage 0.1 mA max.
current
Residual 1.5 V max.
voltage
ON delay 0.1 ms max.
OFF delay OUT01000/01001: 0.2 ms max. (load current: 100 to 300 mA)
Other than OUT01000/01001: 1 ms max. (load current 5 to 300 mA)
Fuse V1 CPUs: No fuse
Expansion I/O Units and Pre-V1 CPUs. 1.25 A/common (cannot be replaced by the user)
Circuit
configuration
Note: When using the OUT01000 or OUT01001 as a pulse output, connect dummy resistors as required to set the load current to 0.1 to
0.2 A. If the load current is below 0.1 A, the ON-to-OFF response time will become longer and high-speed pulse will not be output.
On the other hand, if the load current is above 0.2 A, the transistor may generate heat and components may be damaged.
CPM1A- CPM1A-
20CDT-j(-V1) 30CDT-j(-V1)
/ , 0.3 A/point (See note)
--15%
0.9 A/common 0.9 A/common
1.8 A/Unit 2.7 A/Unit
0.5 ms max. (load current: 5 to 100 mA)
CPM1A- CPM1A-
20CDT1-j(-V1) 30CDT1-j(-V1)
/ , 0.3 A/point (See note)
--15%
0.9 A/common 0.9 A/common
1.8 A/Unit 2.7 A/Unit
0.5 ms max. (load current: 5 to 100 mA)
CPM1A- CPM1A-20EDT
40CDT-j(-V1)
0.9 A/common 0.9 A/common
3.6 A/Unit 1.8 A/Unit
1 ms max.
(24 VDC
CPM1A- CPM1A-20EDT1 CPM1A-8ET1
40CDT1-j(-V1)
0.9 A/common 0.9 A/common
3.6 A/Unit 1.8 A/Unit
1 ms max.
(24 VDC
Micro Programmable Controller
CPM1A-8ET
4.5 to 30 VDC
0.2 A (See note 2.)
0.3 A (See note 3.)
+10%
/ , 5 to 300 mA)
--15%
4.5 to 30 VDC
0.2 A (See note 2.)
0.3 A (See note 3.)
+10%
/ , 5 to 300 mA)
--5%
CPM1A
A--29