Chicco PD348997B Assembly Instructions Manual page 2

PEG-PEREGO
1
2
CLICK
4
Car Seat Adapter Installation:
1 Insert C bar into the corresponding left and right Adapter
Brackets by placing the end of the C bar into the hole on the
mounting bracket.
NOTE: The upper holes (A) are to be used for the Peg-Perego
Primo Viaggio 4-35. The lower holes (B) are for the Peg-
Perego Primo Viaggio SIP.
2 Insert Adapter Brackets into the corresponding mounting
brackets on your stroller. The Adapter Brackets are secure
when they click into place.
A
B
3
5
2
CLICK