TABLE OF CONTENTS Registration and Recall BOOSTER SEAT USE Child Guidelines If you have any problems with your Chicco Booster Seat, Install Booster Seat Safe Use Checklist or any questions regarding installation or use, please call: Securing Child in Booster Seat...
REGISTRATION AND RECALL REGISTRATION AND RECALL Please complete the Registration Card that came with your Booster Seat and mail it promptly. Child restraints could be recalled for safety reasons. You must register this restraint to be reached in a recall. Send your name, address, e-mail address if available, and the restraint’s model number and manufacturing date to: Artsana USA, Inc.
Page 4
CHILD GUIDELINES CHILD GUIDELINES This Booster Seat is designed for children who demonstrate an ability to sit in a seat belt and meet the following requirements. ONLY use this Booster Seat if the child meets the following requirements: • Child can sit relatively still, in the same seated position throughout the car ride.
Page 5
Make sure your child can sit in the seat properly and meets the requirements listed in the “Child Guidelines” section on page 4: Chicco recommends not using a Booster Seat to secure your child prior to age 4. BOOSTER SEAT USE requirements on page 16.
Page 6
IMPORTANT WARNINGS IMPORTANT WARNINGS WARNING WARNING DEATH or SERIOUS INJURY CAN OCCUR DEATH or SERIOUS INJURY CAN OCCUR FAILURE TO FOLLOW THESE INSTRUCTIONS AND THE PRODUCT Install Child Restraint Correctly LABELS CAN RESULT IN SERIOUS INJURY OR DEATH TO YOUR CHILD. •...
Page 7
• Make sure vehicle Lap-Shoulder Belt is not loose. The belt must be kept snug across child’s thighs and by Chicco USA. Doing so will void the warranty of this Booster Seat. resting on the shoulder and across the center of the chest.
In the event of a sharp turn, sudden stop, or crash, loose objects can be thrown • Contact Chicco, USA by visiting our website at www.chiccousa.com or around and possibly cause serious injury to vehicle occupants. calling our Customer Service 1-877-424-4226. Please have Model and •...
BOOSTER SEAT COMPONENTS BOOSTER SEAT COMPONENTS LATCH Connector Armrest Shoulder Belt Clip Storage Lap Belt Guide Carry LATCH Handle Adjustment Strap Cup Holder LATCH Release Handle User Guide Shoulder Positioning Storage Clip & Webbing...
Page 10
CHILD REQUIREMENTS CHILD REQUIREMENTS Booster Seat: WARNING! Use of this Booster Seat is ONLY for children who meet ALL 40 – 110 lbs (18 – 50 kg) of the requirements shown here. If the child is not within these requirements because the child is too small, select a different child seat.
VEHICLE SEATING POSITIONS VEHICLE SEATING POSITIONS Some vehicles have no seating positions which are compatible with this Booster Seat. Only forward-facing vehicle seats can be used with this Booster Seat. Never use side or rear facing seats. If in doubt, contact the vehicle manufacturer for assistance.
VEHICLE SEAT BELTS VEHICLE SEAT BELTS The following types of vehicle belts MUST NOT be used to install this Vehicle seat belts differ from vehicle to vehicle. Refer to your vehicle owner’s Booster Seat. manual for specific information about seat belts and their use with booster seats.
WHAT IS LATCH? WHAT IS LATCH? WARNING: This Booster Seat is designed to be used with lower LATCH anchors at the standard spacing (11 inches) ONLY! Refer to vehicle owner’s manual for information about LATCH and Booster Seat installation positions. Vehicle Lower Anchor Points...
Page 14
ASSEMBLY ASSEMBLY Assemble the Cup Holder Match up the letter (L or R) on the bottom of the Cup Holder with the matching letter on the Booster Seat and insert the Cup Holder into the correct side. Make sure the Cup Holder lip fits behind the groove on the Booster Seat bottom, as shown.
INSTALL BOOSTER SEAT INSTALL BOOSTER SEAT The Shoulder Positioning Clip is stored under the Booster Seat. Remove the Shoulder Positioning Clip and Strap stored underneath seat. Place the Booster Seat onto the vehicle seat.
Page 16
INSTALL BOOSTER SEAT INSTALL BOOSTER SEAT Use of LATCH with this Booster Seat is optional. If the LATCH Connectors are not used, pull the LATCH Tightening Strap snug so that the LATCH Connectors do not “CLICK” interfere with the seat belt. If using LATCH, pull the LATCH Release Handle (a) and pull out both LATCH Connectors (b).
SECURING CHILD IN BOOSTER SEAT SECURING CHILD IN BOOSTER SEAT Place the child into the Booster Seat, making sure the child is sitting with his/her back against the vehicle seat back. Child’s ears must be below vehicle seat back or vehicle head restraint when sitting on Booster Seat.
Page 18
SECURING CHILD IN BOOSTER SEAT SECURING CHILD IN BOOSTER SEAT To adjust the Shoulder Positioning Clip, pull the clip up or down to adjust the Shoulder Positioning Clip to be at child’s shoulder. Slide the vehicle shoulder belt through the Shoulder Positioning Clip (as shown).
Page 19
SECURING CHILD IN BOOSTER SEAT SECURING CHILD IN BOOSTER SEAT Child is now secured correctly, as shown. When using this Booster Seat, the Shoulder Positioning Clip must be used until the seat belt naturally lays flat across the center of the child’s shoulder.
SECURING CHILD CHECKLIST SECURING CHILD CHECKLIST Do not let your child slide forward ALWAYS check to make sure vehicle seat belt is or downward while in the Booster securely buckled. If buckle separates, child could be killed Seat. or seriously injured. ...
BOOSTER SEAT SAFE USE CHECKLIST BOOSTER SEAT SAFE USE CHECKLIST To avoid injury to others, ALWAYS secure this Booster Seat when unoccupied. An unsecured Booster Seat could injure other occupants in a sudden stop or crash. Secure the unoccupied Booster Seat with either LATCH or the vehicle belt by following the appropriate steps below.
INSTALLATION ON AN AIRCRAFT INSTALLATION ON AN AIRCRAFT • This Booster Seat is NOT certified for use on aircraft. Aircraft do not have lap-shoulder belts to secure your child.
CUP HOLDER CUP HOLDER WARNING! DO NOT place hot liquids in cup holder. If spilled, hot liquids could burn child. PLASTIC CONTAINERS ONLY - No glass or metal containers. Only use cups with less than 12 oz. (355 ml) capacity. Never place sharp or pointed objects in Cup Holder.
Page 24
RELEASE LATCH CONNECTORS RELEASE LATCH CONNECTORS To release the LATCH Connectors and remove the Booster Seat, pull firmly on the LATCH Release Handle while pulling the Booster Seat out and away from the vehicle seat. Then pull the LATCH Adjustment Strap tight to store the LATCH Connectors.
REMOVING FABRIC COVERS REMOVING FABRIC COVERS Before you can remove the fabric, pull out both LATCH Connectors (Refer to page 28) and remove both Cup Holders (Refer to page 42). Booster Seat bottom Remove both Cup Holders and flip the Booster Seat bottom over and unhook 8 elastic loops, as shown.
Page 26
REMOVING FABRIC COVERS REMOVING FABRIC COVERS Flip the fabric over and remove the Insert before you wash the fabric. Make sure to reinstall the Insert into the fabric seat bottom before reinstalling onto the seat bottom frame.
Page 27
REMOVING FABRIC COVERS REMOVING FABRIC COVERS Repeat Removing Fabric steps in the reverse order, ensuring that the fabric cover fits onto and around the frame correctly, in particular around the orange belt guides. The Insert MUST be reinstalled into the seat bottom fabric, see page 48. Position the fabric cover on the Booster Seat bottom and tuck in the fabric along the belt guide edges.
Page 28
REMOVING ARMREST COVERS REMOVING ARMREST COVERS Armrest Covers Locate the Armrest release button directly under the front of the Armrest. Pull on the button and at the same time lift up on the front edge to remove the Armrest pad.
Page 29
REMOVING ARMREST COVERS REMOVING ARMREST COVERS Pull back on the edges of the Armrest fabric covers and slide the fabric off the Armrest base. To reattach the Armrest, insert the Back Tab into the Armrest base and push down on the front edge until it clicks into the base. Back NEVER use seat without Armrest fabric covers.
CLEANING AND MAINTENANCE CLEANING AND MAINTENANCE DO NOT USE BLEACH, solvents or household cleaners as they may • Storing the Booster Seat: weaken plastics and straps. When it is not installed in the car, it is recommended to store the Booster Seat in a dry place, away from sources of heat, dust, humidity DO NOT USE SOAPS OR LUBRICANTS on the LATCH Connectors or and direct sunlight.