Introduction; Purpose Of This Documentation; History - Siemens SITRANS TH400 Operating Instructions Manual

Introduction

1.1

Purpose of this documentation

These instructions contain all information required to commission and use the device. It is
your responsibility to read the instructions carefully prior to installation and commissioning. In
order to use the device correctly, first review its principle of operation.
The instructions are aimed at persons mechanically installing the device, connecting it
electronically, configuring the parameters and commissioning it, as well as service and
maintenance engineers.
1.2

History

This history establishes the correlation between the current documentation and the valid
firmware of the device.
The documentation of this edition is applicable for the following firmware variants:
Edition
PROFIBUS PA version:
01
02/2007
02
06/2010
03
03/2014
FOUNDATION fieldbus version:
01
02/2007
02
06/2010
03
03/2014
The most important changes in the documentation when compared with the respective
previous edition are given in the following table.
SITRANS TH400
Operating Instructions, 03/2014, A5E01018688-03
Firmware identification type
plate
FW: V2.03 and FW: V2.04
Note: The firmware revision of
TH400 PROFIBUS PA 2.04 is
equivalent to the firmware
revision 2.03, even if the
GSD/EDD indicates firmware
revision 2.03.
FW: V2.03 and FW: V2.04
System integration
PDM V6.0
DD rev. 1.00
Standard fieldbus
compatible control
systems
1
Installation path for PDM
SITRANS TH400
Not relevant.
5