Samsung PROXPRESS C301X SERIES User Manual page 168

System Setup
Item
Determine whether or not the machine continues
printing when it detects the paper does not match the
paper settings.
• Off: If a paper mismatch occurs, the machine waits
Auto Continue
until you insert the correct paper.
• On: If a paper mismatch occurs, an error message
will display. The machine waits for about 30 second,
then automatically clear the message and continue
printing.
Determine whether or not the machine continues
printing when it detects the paper does not match. For
example, if both tray 1 and tray 2 are filled with the
same size paper, the machine automatically prints from
tray 2 after the tray 1 runs out of paper.
Auto Tray Swi.
Automatically substitutes the printer driver's paper size
to prevent the paper mismatch between Letter and A4.
For example, if you have A4 paper in the tray but you
Paper Substit.
set the paper size to Letter in the printer driver, the
machine prints on A4 paper and vice versa.
Description
This option does not appear if you selected
Auto for Paper Source from printer driver.
Item
Decides to use or not use the Auto Tray Swi. feature. If
Tray Protect you set tray 1 to on, for example, then tray 1 is excluded
during tray switching.
Tray Mode Specifies whether or not the machine automatically
changes the paper settings to the required settings
when you close the tray.
• Static: The tray settings do not change when you
open and close the tray.
• Dynamic: If you open and close the tray when a
paper mismatch occurs, the paper settings (size and
type) for that tray automatically change to the
settings required for the job. (When you open and
close the tray in the Dynamic mode, the machine
presumes that the paper in the tray was replaced
with the size and type required for the job.)
The printer detects the printing data from computer
SkipBlankPages whether a page is empty or not. You can set to print or
skip the blank page.
Description
168
3. Useful Setting Menus