Samsung PROXPRESS C301X SERIES User Manual page 125

Wired network setup
1 Select (Menu) > Network > TCP/IP (IPv6) > DHCPv6 Config on the
control panel.
2 Press OK to select the required value you want.
• Always Use: Always use DHCPv6 regardless of router request.
• Never Use: Never use DHCPv6 regardless of router request.
• Router: Use DHCPv6 only when requested by a router.
Activating IPv6 from SyncThru™ Web Service
1 Access a web browser, such as Internet Explorer, from Windows. Enter
the machine IP address (http://xxx.xxx.xxx.xxx) in the address field and
press the Enter key or click Go.
If it's your first time logging into SyncThru™ Web Service you need to log-
2
in as an administrator. Type in the below default ID and password. We
recommend you to change the default password for security reasons.
• ID: admin
• Password: sec00000
3 When the SyncThru™ Web Service window opens, move the mouse cursor
over the Settings of the top menu bar and then click Network Settings.
4 Click TCP/IPv6 on the left pane of the website.
Check the IPv6 Protocol check box to activate IPv6.
5
Click the Apply button.
6
7 Turn the machine off and turn it on again.
• You can also set the DHCPv6.
• To manually set the IPv6 address:
Check the Manual Address check box. Then, the Address/Prefix text box is
activated. Enter the rest of the address (e.g.,:3FFE:10:88:194::AAAA. "A" is the
hexadecimal 0 through 9, A through F).
IPv6 address configuration from SyncThru™ Web Service
Start a web browser, such as Internet Explorer, that supports IPv6
1
addressing as a URL.
Select one of the IPv6 addresses (Link-local Address, Stateless Address,
2
Stateful Address, Manual Address) from Network Configuration Report
(see "Printing a network configuration report" on page 122).
• Link-local Address: Self-configured local IPv6 address (Address
starts with FE80).
• Stateless Address: Automatically configured IPv6 address by a
network router.
• Stateful Address: IPv6 address configured by a DHCPv6 server.
• Manual Address: Manually configured IPv6 address by a user.
• Default Gateway: Default gateway configured IPv6 address by a
network router.
3 Enter the IPv6 addresses (e.g.,: http://[FE80::215:99FF:FE66:7701]).
Address must be enclosed in '[ ]' brackets.
2. Using a Network-Connected Machine
125