Set Up The Wi-Fi Connection For The First Time - Philips AC4373 User Manual

Note
Make sure that the side with the tag is
•
pointing towards you.
7
Place the pre-filter in the appliance.
Note
Make sure that the side with the
•
two locking clips is pointing towards
you, and that all hooks are properly
attached to the appliance.
8
To re-attach the front panel, insert the
bottom hooks into the bottom of the
appliance first (1). Then, push the panel
against the body of the appliance (2).
Set up the Wi-Fi connection
for the first time
Note
This instruction is only valid when the
•
air purifier is being set up for the first
time, or if a factory reset has been
performed. If the network has changed
or the setup needs to be performed
again, consult chapter "Set up the Wi-Fi
connection when the network has
changed" on page 9.
You cannot set up two air purifiers at
•
the same time. If you want to set up
more than one air purifiers, you can
only do it successively.
Make sure that the distance between
•
your mobile device and the air purifier
is less than 10 meters without any
obstructions.
1
Plug the air purifier into the power
socket.
2
Press the button once, and the Wi-
Fi indicator
orange color.
3
Download the "Philips Smart Air"
app by scanning the QR code or visit
www.philips-smartairpurifier.com.
4
Have your network name and
password ready for entry.
will slowly blink with an
EN 9