Configuration With No Wep Security - Asus AAM6030EV Quick Setup Instructions Manual

Now, to configure the 802.11b wireless setup click on the menu item labelled 'IEEE 802.11B':
There are two basic ways of running your wireless network:
With WEP security and without WEP security. It's easiest to start without security.

3.1 Configuration with no WEP security

Click on IEEE/Basic:
Ensure that the Channel and ESSID (if used by your computers wireless adapter) match those used by your wireless clients. If
you have to change any settings then click on submit and then on save to store the changes.
Next click on Advanced:
Things to check on this screen are that the Fragmentation Threshold and RTS Threshold match those used on you wireless
clients adapters. Check that the Authentication type is set to 'Open System'; this means NO security. Check that Basic and
Transfer Rates are both set to 1,2,5.5,11 (so that the router will accept connection from wireless clients at any standard 802.11b
speed). As before, if you have to change any settings then click on submit and then on save to store the changes.
Now click on WEP:
- 5 -