Wlan Bridging Mode - Asus AAM6030EV Quick Setup Instructions Manual

Now... after rebooting the wireless link should work:

3.3 WLAN Bridging Mode

Imagine there are three networks connected at the router:
•
The external WAN network (to your ISP).
•
The internal 'wired' network (via the 4 LAN ports on the router).
•
The internal wireless network (using 802.11b)
The Quick Setup Wizard/WLAN configuration allows you to control the way the 'wired' and wireless networks integrate.
The three options are:
None – this means that clients on the 'wired' network can see the router but can't see any clients on the 'wireless' network and
vice-a-versa (wireless clients can see the router but not the wired clients).
Bridged Mode – This is the default mode and in this mode the wireless network forms an extension of the wired network
forming a whole single network with the router hanging off it. In this setup you must ensure that the IP addresses for the
- 13 -