Table of Contents
Advertisement
Next check the SSID string: It must be the same for both the router and the
PCMCIA card. The default setting for the router is 'Wireless':
Finally turn Wep off (at least for this initial testing anyway):
- 12 -
Now check that the router settings are the same....
So check the SSID matches the PCMCIA card
('Wireless')...
The Channel setup doesn't matter for the PCMCIA
card because the card driver will auto-scan until it
finds the channel to use.
If you do any changes you need to a Submit and then
a Save to store the new values.
Next check the Fragmentation Threshold, and the
RTS Threshold, and set the Authentication to Open.
If you do any changes you need to a Submit and then
a Save to store the new values.
Finally Reset the modem to activate the new changes.
Advertisement
Table of Contents
