Ppp Modem Operation; Basic Setup - ATEN KN1000A User Manual

PPP Modem Operation

Basic Setup

In addition to the browser and AP methods, the KN1000A can also be accessed
through its RS-232 port using a PPP dial-in connection, as follows:
1. Set up your hardware configuration to match the diagram, below:
Remote
Operator
2. From your computer, use your modem terminal program to dial into the
KN1000A's modem.
Note: 1. If you do not know the KN1000A modem's serial parameters, get
them from the KN1000A administrator.
2. An example of setting up a modem terminal program under
Windows XP is provided on the next page.
3. Once the connection is established, open your browser, and specify
192.168.192.1 in the URL box.
From here, operation is the same as if you had logged in from a browser or with
the AP programs.
:
Serial Modem Cable
Modem
Phone Line
Modem
Appendix
Serial Modem Cable
155