Installing The Projector; Fitting The Lamp; Power Supply - Mains - Chauvet FOLLOWSPOT 1200D User Manual

INSTALLING THE PROJECTOR

The projector should be mounted through the 12mm hole in its bracket (1). The projector's
bracket allows an angle adjustment of +40° / -40° and, once positioned, the knob (2) should be
firmly tightened. On top of the projector you will find the slot (3) for the iris or for the gobo
holder. At the front of the projector (4) there are the slots for accessories: colour changer with
the black out, filter frame, mechanical dimmer.
Use high rugged professional tripod, followspot dedicated.
Weight of projector: 38Kg without accessories

FITTING THE LAMP

Unscrew the down screws, remove the lamp holder (6) and insert the new lamp, use the lamp
version that is correct for the mains voltage.
Insert the lamp with care and without using excessive force, use a cloth to hold the lamp and
do not touch the glass directly with your hands.
Close the lid and fasten tightly the screws.
Using the screws (7) you can adjust the lamp position, to have an even light beam.
Discharge lamp 1200W, base G22 (MSD o MSR) - LcL85mm – it work in all positions
Regulate the lamp, if necessary. The lamp holder is aligned at the factory.

POWER SUPPLY - MAINS

The projector comes with a 2m cable. It's necessary to mount a suitable plug and correctly
earth the projector.
Class I projector.
BROWN = LINE BLUE = NEUTRAL YELLOW / GREEN = EARTH