Safe Usage Of The Projector - Chauvet FOLLOWSPOT 1200D User Manual

FOLLOWSPOT 1200D
Please note that as part of Arthea ongoing commitment to continuous product development,
specifications are subject to change without notice. Whilst every care is taken in the
preparation of this manual Arthea reserves the right to change specifications in the course of
product improvement. The publishers cannot be held responsible for the accuracy of the
information herein, or any consequence arising from them.
This instruction manual contains important information about the installation and use of the
projector. Please read and follow these instruction carefully.
Always ensure that the power to the projector is disconnected before opening the projector or

SAFE USAGE OF THE PROJECTOR


Do not attempt to dismantle and modify the projector.

Do not allow contact with water or any other fluids, or metallic objects (IP20).

Do not install the projector in areas of high humidity.

The projector is not designed or intended to be mounted directly on to
inflammable surfaces.

Keep at least 0.5m distance between the projector and adjacent inflammable
surfaces.

The projector must only be used complete with its protective grill and/or front lens.

The protective grill, lenses or ultraviolet filter must be changed if they are visibly
damaged to the point at which their effectiveness is diminished, for example by
becoming cracked or deeply scratched.

The lamp must be changed if it becomes damaged or deformed by heat.

Keep at least 2m between the projector and the illuminated surfaces.

Avoid to look directly at the lamp light. The light is harmful to the eye.

Note: the lamp reaches very high temperatures, allow at least 30 minutes for the
lamp to cool completely before attempting to handle it. Ensure the lamp is cool
before attempting to handle it

To ensure the reliability of the projector it should be kept clean. The lens and filters
should also be regularly cleaned to maintain an optimum light output. In locations
such as discotheques the objective lens should be cleaned every week as smoke
fluid can condense on it and very quickly reduce the light output, do NOT use any
type of solvent on filters and lenses.
USER'S MANUAL
Zoom 8/14°: code TE028.MSR.1200
commencing any maintenance work.
ATTENTION