Cisco Asr 903 Aggregation Services Router Hardware Installation Guide - Cisco ASR 903 Hardware Installation Manual

Preparing for Installation
What to Do Next
Table 12: Cisco ASR 903 Router Shipping Container Contents
Component
Chassis
Accessories kit
ESD, wrist strap (disposable)
Documentation
Optional equipment
Unpacking and Verifying the Shipped Contents
Description
Cisco ASR 903 Router chassis
Fan tray
Power supplies
RSP
Interface modules
Chassis rack-mount brackets (19-inch EIA)
Three sets of screws:
• Front and rear rack-mount bracket screws (2 sets)
• Cable-management bracket screws
Six cable-management brackets (one per bracket)
One earth lug with two 10-32 screws.
1 RJ45 to RJ45 crossover cable
1 RJ45 to DB-9 (female) adapter
One disposable wrist strap (optional)
Regulatory Compliance and Safety Information for the Cisco
ASR 903 Router
Check the container for the following optional equipment:
• Power cord if an AC power supply was shipped. There are
no cords for the DC power supply units.
• T1/E1 cable connector (required only for T1/E1 interface
modules)

Cisco ASR 903 Aggregation Services Router Hardware Installation Guide

77