Chapter 2 Preparing For Installation; Safety Guidelines; Standard Warning Statements - Cisco ASR 903 Hardware Installation Manual

Preparing for Installation
This chapter describes how to prepare for the installation of the Cisco ASR 903 Router at your site.
•
•
•

Safety Guidelines

Before you begin the installation of the Cisco ASR 903 Router, review the safety guidelines in this chapter
to avoid injuring yourself or damaging the equipment.
In addition, before replacing, configuring, or maintaining the Cisco ASR 903 Router, review the safety
warnings listed in Regulatory Compliance and Safety Information for the Cisco ASR 903 Router.

Standard Warning Statements

To see translations of the warnings that appear in this publication, refer to the Regulatory Compliance and
Safety Information document that accompanied this device.
The appliance must be connected to a grounded outlet. Statement 0414
Warning
Warning To avoid or reduce the risk of personal injury, do not use the product if the product has been exposed to
irregular environmental conditions, if the product has been misused or if parts of the product have been
damaged. Consult qualified service personnel. Never try to service the product yourself. Statement 0416
To reduce the risk of shock, fire or personal injury, do not place power cables in areas where they may
Warning
be walked on or damaged by items placed upon or against it. Statement 0417
Safety Guidelines, page 53
Site Planning, page 63
Receiving the Cisco ASR 903 Router, page 74
C H A P T E R
Cisco ASR 903 Aggregation Services Router Hardware Installation Guide
2
53