I-Tech SLED6448F-6 User Manual
  1. Manuals
  2. Brands
  3. I-Tech Manuals
  4. Monitor
  5. SLED6448F-6
  6. User manual
I-Tech SLED6448F-6 User Manual

I-Tech SLED6448F-6 User Manual

Sled series
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
SLED
User's Manual
(v3.1.5)
Document Version 1.1
i-Tech Company LLC
TOLL FREE: (888) 483-2418 • EMAIL:
info@iTechLCD.com
• WEB:
www.iTechLCD.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SLED6448F-6 and is the answer not in the manual?

Questions and answers

Related Manuals for I-Tech SLED6448F-6

Summary of Contents for I-Tech SLED6448F-6

  • Page 1 SLED User’s Manual (v3.1.5) Document Version 1.1 i-Tech Company LLC TOLL FREE: (888) 483-2418 • EMAIL: info@iTechLCD.com • WEB: www.iTechLCD.com...
  • Page 2 I-Tech Company LLC. Disclaimer I-Tech Company LLC. has reviewed this manual and provides it only as a guide to operation. All statements, technical information, and recommendations in this manual and in any guides or related documents are believed reliable, but the accuracy and completeness thereof are not guaranteed or warranted, and they are not intended to be, nor should they be understood to be, representations or warranties concerning the products described.

  • Page 3: Important Safety Instruction

    Important Safety Instructions ■ Read and follow these instructions. And keep all instructions. ■ Heed all warnings. ■ Do not use this product near water. Clean only with a dry cloth. ■ Install in accordance with the manufacturer's instructions. ■ Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatuses that produce heat.

  • Page 4: Product Cautions

    Product Cautions TO PREVENT POSSIBLE DANGER, ELECTRIC SHOCK, AND OTHER INJURIES WHEN HANDLING YOUR SIGNAGE, PLEASE BE AWARE OF OF ALL WARNINGS AND SAFETY PRECAUTIONS LISTED BELOW. Never insert anything into the LED signage, where objects can come into contact with high voltage nodes or damage internal components. Do not attempt to service the signage yourself.

  • Page 5: Table Of Contents

    Contents Important Safety Instruction Product Cautions Introduction Application and Feature Unpacking Your SLED SLED Dimension Hardware & Software Installation Software Operation Turning the Signage On and Off Brightness adjustment Video Playing Controlling File Format Supported Specification of SLED...

  • Page 6: Introduction

    1. Introduction SLED series models are innovated electronic LED signage, which is characterized by low power consumption and ultra-thin & lightweight for easy carry and installation. Differed from traditional type, SLED series models, with weighs from 3~ 18kgs and thickness from 28 ~ 40mm, is integrated with 8x8 full color LED modules that are constitutes by 3-in-1 RGB LED with dot pitch 6mm, a memory card and a control system.

  • Page 7: Application And Feature

    2.1 Application □ Indoor (semi-indoor) LED display; □ LED message signboards □ Advertising signage □ Installation art or media art 2.2 Feature □ 3-in-1 SMD LED □ 6 mm pixel pitch □ 10-bit (1024) grayscale PWM control for each single LED □...

  • Page 8: Unpacking Your Sled

    3 Unpacking Your SLED Before using your new signage, you should unpack the contents of the box and check to make sure everything is present and undamaged. To unpack the signage: A. Set the box upright near the intended signage location. B.

  • Page 9: Sled Dimension

    4. SLED Dimension 4-1. Model: SLED6448F-6 Figure 1...
  • Page 10 4-2. Model: SLED12848F-6...
  • Page 11 4-3. Model: SLED19248F-6 Figure 3...
  • Page 12 4-4. Model: SLED25648F-6 Figure 4...
  • Page 13 4-5. Model: SLED12896F-6 Figure 5...

  • Page 14: Hardware & Software Installation

    5. Hardware & Software Installation 5.1. If you are going to connect several SLED to show one video file, please be make sure to connect the SLED by Plastic optical fiber cable by Figure 6 list. (p.s. 5.1 is unnecessary if connection is only one unit SLED).
  • Page 15 5.2. Plug in the power cable to SLED and connecting the USB cable from your computer to SLED. (as Figure. 7.) Figure 7 5.3. Insert the SLED software, which is attaching with SLED, to PC. For Windows XP A. Please execute “SLEDApp3.x.x.exe ” .
  • Page 16 B. Click NEXT> to start installation. C. When enter to License Agreement dialog, please select I accept the terms in the license agreement and click Next> to next step.
  • Page 17 D. Please click NEXT> to next step. E. When enter Setup Type dialog, please select Typical and click NEXT> to next step.
  • Page 18 F. When enter to Ready to Install the Program dialog, please click Install button to install SLED APP and the status bar will track the installation status.
  • Page 19 G. Please click Finish button to finish the installation. H. Then please install WinPcap. Please click NEXT> to next step.
  • Page 20 I. The click NEXT> to next step. J. When enter to License Agreement dialog, please select I Agree.
  • Page 21 K. The please click Install button to start installation. L. The click Finish to finish the installation.
  • Page 22 M. Please select Yes to re-start your system. N. After re-starting the system and installed the software successfully, you may find SLEDAPP shortcut on the desktop.
  • Page 23 【P.S.】You may also find ezSignageAPP as below figure list.
  • Page 24 For Windows 7 A. Please execute “ezSignageAPPA3.x.x.exe B. Click NEXT> to install EZSignageAPP...
  • Page 25 C. When enter License Agreement dialog, please select I accept the terms in the license agreement then click Next> to next step (as below figure). C-1. Then click NEXT> to next step (as below figure). »-...
  • Page 26 D. When enter Setup Type dialog, please select Typical, then click NEXT> to next step. (as below figure). E. When Ready to Install the Program dialog appeared, please click Install to start software installation. ■■L...JB''...
  • Page 27 F. Please select Install this driver software anyway to next step.
  • Page 28 G. Then click Finish to finish the installation. H . After finished the software installation, the WinPcap setup diagram will appeared, please click NEXT> to next step.
  • Page 29 I. Then click NEXT> to next step. J. When enter License Agreement dialog, please click I Agree to next step.
  • Page 30 K. Please click Install to start installation. L. Please click Finish to finish the installation.
  • Page 31 M. Please click NEXT> to install ReadyDriver Plus。 N. Please select I accept the agreement and click Next> to next step.
  • Page 32 O. Then click Next> to next step. P. Please select the initial setting and click Next> to next step.
  • Page 33 Q. Please select initial setting and click Next> R. Please click Next>.
  • Page 34 S. Please select Install to start installation. T. Please select Finish to finish installation.
  • Page 35 U. Please select Yes to restart. V .You will find ezSignageApp shortcut on desktop when you restart the PC.
  • Page 36 5.4. Please execute ezSignageAPP short cut The introduction and function of ezSignageAPP are:...
  • Page 37 Project Manager : The function of Project Manager is using for adding, editing, deleting, importing, exporting projects or download projects to SLED. Network Setting : The function is used for searching SLED or download contents to SLED by Ethernet. 【Remark】The function is only available for connecting Sbravo’s remote control system. Panel Config : Display signage information.
  • Page 38 Display the model number and quantity which connect with PC. For example, which means there is one model 1x1 (SLED6448F-6) connects with PC. The green “1” means the signage quantity which connects with PC.

  • Page 39: Software Operation

    6. Software Operation 6.1. Create one project Please connect SLED with PC firstly, then click the shortcut of ezSignageAPP to enter the main menu. Please click “Project Manager” icon to enter Project Manager dialog to edit files.
  • Page 40 6.1.1. Add one Project A. Please click to add project...
  • Page 41 C. If project creates successfully, below dialog will appear. Please click OK to next step. D. After click OK, the Select Signage Type Dialog will appear (as below figure). The signage model number and quantity which connect with PC will be showed on this dialog. For example, below figure means there is one 1x1 which connects with PC.
  • Page 42 Zoom in Zoom out Zoom all Signage Location setting G0: Same Group,G1: Another Group S0：Master LED screen S1 : Slaver LED Screen Yellow area：Current editing LED Signage ↑Upward Arrow：The text scroller texts are facing front. ↓Downward Arrow：The text scroller texts are facing opposite, like specular reflection.
  • Page 43 Alignment ■ Long-press “shift” button and select all signage to set all signage as a group to move them at same time. > ■ All signage play the same media : Overlap all signage on Panel Position. : Align signage against leftward：Long-press “shift” button and select the signage which should be alignment.
  • Page 44 6.1.2. Edit media file (both video and picture) Please select SLED model and make sure the signage connects PC before edit media file. You may find the model number and quantity that you plan to connect with pc on Panel Info (as below figure).
  • Page 45 Delete Media OK: Confirmation 6.1.2.1 Edit Media file A. You may start editing media file after added video file or picture.
  • Page 46 B. Please select the video or picture that you plan to edit, then click to enter Edit Media Dialog (as below figure). C. When enter Edit Media Dialog, you may start editing, as the relevant function introduction as follows: a) Edit Video...
  • Page 47 b) Edit Picture Media Info : Display the resolution of media file. View : Display the ratio for current playing video file. Duration：Set the playing time for picture. (The function didn’t support Video file). Zoom in Zoom out Zoom all Fit Medai size to LED Panel...
  • Page 48 Adjust size of media : Below figure appears when click the icon of Adjust size of media. The Media size has to be bigger than Pane Size (value of X, Y axles), please click Enter button after the value setting. Unlock Media: Click this icon before your editing.
  • Page 49 Upload the picture resolution based on the radio of 1:1 to the LED signage. (This function is only available for picture file, which cannot support Video file.) 【Remark】The function will be disable if you already excute (fit media size to the panel), or (adjust size of media file).
  • Page 50 6.1.2.2 Edit Text Scoller Display the ratio of Current video file Zoom in Zoom out Zoom all Display all the texts Unlock media file OK：Save all the setting and exit the dialog.
  • Page 51 Add TextBox: The TextBox List dialog will appear when click this icon. The relevant functions introduction as follows: You may type the texts that you’d like to display on this area. You may set the font by the Font function key (as left figure) Select the text gradient by Gradient function key (as left figure).
  • Page 52 You may set Text Effect, such as fonts outline color, thickness by the Text Effect function key. (as left side figure). Set the shadow effect, diffused shadow by the left side function key. Width：The shadow thickness; Alpha：Set the transparent for the shadow effect. Offset X/ Y : Shadow location.
  • Page 53 ■ Example to enter the View Window. A. When enter Edit Media Dialog, please click B. Please click to start editing the text scroller (running text).
  • Page 54 C. Please type the text in the area that we marked in red color on below figure. For example, type Sbravo~ If you’d like to edit the text color and effect, please refer to Page 37 and P38 for details. D.
  • Page 55 b) Set the running direction of text scroller (running text): Please remove mouse to the text scroller (running text) display area after setting of start position and end position, then keep pressing the left button of mouse and move the text running direction that you need. (the direction could be up, down, left and right).
  • Page 56 c) Set End Position： Please set the End playing time (please remove time bar as below figure) then move mouse to the text scroller area, click right button of mouse and set it as end time. d) If you’d like to display the text scroller (running text) by different direction, please click Add a New Path (as below figure) then follow above list step a, , b, c to add the new text running direction.
  • Page 57 【Remark】You will find two text scroller (running text) on MovePath List (as below figure) when you finished the two text running setting. (as below figure) to review the text scroller running direction in View Window D. Please click Dialog.
  • Page 58 E. Please click to quit the Edit Text Scroller Dialog if your setting of text scroller are correct. 【Remark】If click you won’t be able to adjust any parameters. Please re-set the text scroller (running text) if you’d like to make any adjustment. F.
  • Page 59 6.1.3. Convert the media file after created project A. Please click to load the media file to signage after project created. 【Remark】Please make sure SLED connects with PC. below dialog will appear, please click “ Yes” to load the contents to SLED. B.
  • Page 60 C. Please refer to below figure for contents loading status. D. Please click “Yes” to start playing contents.
  • Page 61 6.1.4. Edit the media file which exists on the created project. A) Please click the Project that you plan to edit, then click B) Then click the media name that you plan to edit, and click . The right side function key introduction as follows:...
  • Page 62 : Rename Project. When click the icon, the Project Rename Dialog will appear (as below figure), please input the new project name and click Display the relevant project information, includes, model number and quantity. C) When below dialog appears, please refer to 6.1.2. Edit media file to start editing.
  • Page 63 6.1.5. Export Project A) Please select the project that you plan to export, then click B) Then set the object that you plan to save the project and click OK.
  • Page 64 C) Below dialog will appear if project export is successful, then click OK. 6.1.6. Import Project A) Please click if you plan to import the other project to be yours project.
  • Page 65 B) Please click to select the import path. C) The project name that you import will be appeared if your select import path is successful.
  • Page 66 D) Please make sure the project that you import is correct, then click to start importing. E) Below dialog will appear if the import project is successful. F) After click OK, the import project information will appear, as below figure.
  • Page 67 6.1.7. Load the import project to SLED A) Please select project name then click B) Please select USB Mode to load the project to signage.
  • Page 68 C) Then click to start loading. D) Please click “Yes” to start playing after loaded the contents.
  • Page 69 6.2. Panel Config A) Please click Panel Config icon if you plan to adjust parameters of sigange.
  • Page 70 B) Panel Config dialog (as below figure) will appear after click Panel Config icon. Display the model number which connects PC...

  • Page 71: Turning The Signage On And Off

    7. Turning the Signage On and Off Turn on SLED by using power adaptor attached. Connect one end of the power adaptor to power supply (100 ~ 240 AC) and the other end to DC jack connector on the back of SLED. (Note: Don’t use any power adaptor that is not confirmed by iTechLCD) Turn the signage off: Unplug the power adaptor directly.

  • Page 72: Brightness Adjustment

    8. Brightness Adjustment SLED is built-in one ambient light sensor module which is able to detect and adjust the brightness of LED panel automatically. Besides, SLED also provide 5 options (100%, 25%, 50%, 75% and Auto) to adjust the brightness. You may adjust the brightness by pressing the Brightness Control Button on the rear side of Signage.

  • Page 73: Video Playing Controlling

    9. Video playing Controlling You may set to play a certain video file repeatedly by pressing Page Control Button. For example, if you combine 3 video files and transformation them to SLED, the initial setting of SLED is playing 1 video file, then 2 video file and 3 video file and repeatedly.

  • Page 74: File Format Supported

    10. File Format Supported Any format as long as supported by windows can be input in SLED for display, such as: Windows Media○ Video (WMV) Advanced Systems Format (ASF) Motion Picture Experts Group (MPEG) Audio-Video Interleaved (AVI) QuickTime (version 2 and lower) Windows Media Video ISO MPEG-4 video version 1.0 Microsoft MPEG-4 version 3...

  • Page 75: Specification Of Sled

    11. Specification of SLED 11.1 Model No.: SLED6448F-6 Items Specification LED Pixel Pitch 6 mm LED Type 3 in 1 SMD LED Horizontal dots 64 dots Vertical dots 48 dots Total LED dots 3,072 dots of 3-in-1 RGB LED Brightness...
  • Page 76 11.2 Model No.: SLED12848F-6 Items Specification LED Pixel Pitch 6 mm LED Type 3 in 1 SMD LED Horizontal dots 128 dots Vertical dots 48 dots Total LED dots 6,144 dots of 3-in-1 RGB LED Brightness 2,500 nits (cd/m Gradation Level 10 bits for each color;...
  • Page 77 11.3 Model No.: SLED19248F-6 Items Specification LED Pixel Pitch 6 mm LED Type 3 in 1 SMD LED Horizontal dots 192 dots Vertical dots 48 dots Total LED dots 9,216 dots of 3-in-1 RGB LED Brightness 2,500 nits (cd/m Gradation Level 10 bits for each color;...
  • Page 78 11.4 Model No.: SLED25648F-6 Items Specification LED Pixel Pitch 6 mm LED Type 3 in 1 SMD LED Horizontal dots 256 dots Vertical dots 48 dots Total LED dots 12,288 dots of 3-in-1 RGB LED Brightness 2,500 nits (cd/m Gradation Level 10 bits for each color;...
  • Page 79 120 Hz Frame Rate 30 frames per second View Angle Horizontal : 130･ , Vertical : 130･ Weight 12 KGS, w/o accessory Memory 1 CF card inside, 2GB i-Tech Company LLC TOLL FREE: (888) 483-2418 • EMAIL: info@iTechLCD.com • WEB: www.iTechLCD.com...

This manual is also suitable for:

Sled12848f-6Sled19248f-6Sled25648f-6Sled12896f-6

Table of Contents