Viewing The Alarm Time; Setting The Alarm Time; Switching The Alarm On Or Off; Activate Snooze Alarm Or Exit Alarm - Renkforce 1341307 Operating Instructions Manual

Viewing the wake-up time
Press the "MODE" button several times to toggle between the following displays:
• Alarm 1 (indicator "A1" to the right of the wake-up time)
• Alarm 2 (indicator "A2" to the right of the wake-up time)
• Time
Setting the wake-up time
• Press the button "mode" several times, until either Alarm 1 (indicator "A1" to the right of the wake-up
time) or Alarm 2 (indicator "A2" to the right of the wake-up time) is shown in the display.
• Press and hold the "MODE" button (36) for about 3 seconds until the hour of the alarm is flashing on the
screen.
• Use the button "+" (37) or "-" (39) to set the hour. Press and hold the button a little longer for fast adjust-
ment.
• If you press the "MODE" (36) button briefly, the hours of the alarm will begin flashing; use the button "+"
(37) or "-" (39) to set the hour. Press and hold the button a little longer for fast adjustment.
• If you press the "MODE" (36) button briefly, set mode is exited.

Switching the alarm on or off

• Press the "MODE" button (36) repeatedly, until either Alarm 1 (indicator "A1" to the right of the wake-up
time) or Alarm 2 (indicator "A2" to the right of the wake-up time) is shown in the display.
• Press the "-" button (39) briefly to turn the selected alarm function on or off. When the alarm function is
turned on, the bell icon will appear above the associated indicator "A1" or "A2":
Icon " ":
Icon " ":
Icon " ":
No display:
Activating the snooze alarm or cancelling the alarm signal
• At the time set for the alarm, the wake-up signal is activated and the bell icon "
" "(for Alarm 2) is flashing.
• Press the "SNOOZE/LIGHT" button (38) on top of the weather station to stop the alarm signal for 5 minu-
tes. During this pause, the bell icon keeps on flashing.
Then the alarm signal will sound again. This procedure can be repeated multiple times.
• To cancel the alarm (or the snooze mode), press any button except the "SNOOZE/LIGHT" (38) button.
If no button is pressed, the alarm will stop automatically after 2 minutes.
44
Alarm function with Alarm 1 turned on
Alarm function with Alarm 2 turned on
Alarm function with both alarms active
Alarm turned off
" (for Alarm 1) or