cyclotest myWay Instructions For Use Manual page 7

• Do not expose the thermometer to extreme heat (blazing sun, heating, hot water, etc.). This could
unnaturally affect the temperature measurement.
• The unit is not shockproof or impact-resistant. We recommend you have the unit checked for accu-
racy after bigger drops or impacts.
• The unit contains small parts that could be swallowed by children. For this reason, keep the unit
out of reach of children. There is also the potential danger of strangulation by the measuring cable.
• Damage caused by children, pets or pest will inevitably result in the disruption of the cycle meas-
urement series.
• Lithium polymer batteries can ignite if overcharged. For this reason, use only the supplied charger
to charge the battery. Using other chargers increases the risk of the battery igniting or exploding!
• Check that tip of the thermometer is undamaged prior to measurement. A damaged thermometer
sensor can cause injuries.
• Do not bite or excessively bend the sensor. This may result in damage and malfunctions.
• The plastic and the metal of the sensor comply with the biocompatibility requirements in accordance
with ISO 10993-1. The golden coating on the measuring tip prevents a nickel allergy reaction. The
plastic of the sensor is free of latex and consists of biocompatible TPE.
• All serious incidents connected with the unit must be reported to the manufacturer and the respon-
sible authority in the Member State in which the user is resident.
Safety Instructions
EN-7