Reset Button - cyclotest myWay Instructions For Use Manual

The unit may think you are pregnant for a few different reasons:
1.
You are taking an extended break from temperature taking.
2.
You forgot to start a new cycle on the first day of menstruation (see P. 21). The unit interprets this
as a missed period.
3.
If there is actually no menstruation, you may be pregnant. You are advised to take a pregnancy test.
Important: If within a cycle you observe inexplicable temperature measurements that deviate
dramatically from your previous cycles, call the cyclotest® service hotline.

Reset Button

If the unit stops responding to inputs and can no longer be activated by pressing the ON/OFF button,
you can restart the unit with the Reset button.
The Reset button is located in the battery compartment behind the battery and can be pressed with a
thin pointed object.
The last measurement time window saved will still be valid. Your existing cycle data will still be saved.
Operating the Unit
EN-43