Cleaning And Upkeep - cyclotest myWay Instructions For Use Manual

Cleaning and Upkeep

The unit is not waterproof and must not be immersed in water! Clean the unit with a moistened cloth
and a mild cleaning agent. The holder for the sensor can be cleaned with a cotton bud.
The sensor itself is waterproof and can therefore be immersed in lukewarm water for cleaning.
Our recommended frequency for cleaning the measuring sensor would be every 2-3 days or at least
once a week.
Warning: Do not under any circumstances use hot water to clean the sensor, as high tempera-
tures can damage the sensor (for brief periods max. 40-45 °C)!
If you feel the unit needs to be disinfected, use an ethyl alcohol solution or ethyl alcohol wipes (avail-
able in all good pharmacies).
Attention upon accidental contact with fluids! For example drink has been spilled over the de-
vice: Wipe device with a soft cloth, remove battery and charger, contact the cyclotest® service
hotline.
EN-46