Mysoftware - cyclotest myWay Instructions For Use Manual

Charge the battery, when the battery symbol switches to yellow and starts flashing. A beep will sound
periodically to remind you.
Connect the charging cable to the connecting socket on the unit and plug into a power socket.
A charging battery symbol appears during the charging process when the display is activated. The
charging process is finished when the charge state display shows 100 %.
At the end of the charging process disconnect the unit from the power supply and detach the charging
cable from the unit.
Note: It takes approximately 2 hours to charge a completely flat battery. The charging time is shorter
for a partially discharged battery.
Note: If you will not be using the unit for an extended period, you should charge the battery
roughly every 6 months to prolong its life.

mySoftware

cyclotest® mySoftware is supplementary software for transferring and displaying measurement data
from the cyclotest® fertility monitor onto a computer (Windows and Mac). You will find the link for
downloading on our home page in the area service under the separate menu cyclotest mySoftware.
For more information on cyclotest® mySoftware,
see separate instructions for use.
Operating the Unit
EN-45