Network; Event - Qtum HD1049 Installation And User Manual

4. Network

4-1. NTP

5. Event

5-1. E-mail Registration
HD1049 installation and user manual
NTP setup allows the DVR to have its internal
clock synchronised with an External clock.
The default setting is "Off"
Type allows selection between:
Default – Time server is "time.bora.net".
Domain – Where another time server name can
be added.
IP – Where an IP address for a time server can
be input.
Select City :
Once the NTP settings have been set, you must
then tell the DVR which time zone you are in.
This will allow it to offset any time differences if
the time server you contact is in a different zone.
Select City, the map screen will appear. Hovering
over the city selection box, a drop down arrow
will appear, click on the arrow. A list of time zones
will be displayed. Select the time zone where the
DVR is located.
The DVR will send E-mails to up to 3
defined addresses
conditions such as Alarms or video
loss. The screen is where you setup
the receiving address and address that
the DVR will send from.
The mails can be set to be sent
immediately an event occurs, Daily or
Weekly.
72
under certain