Ptz Controller; Etc - Qtum HD1049 Installation And User Manual

HD1049 installation and user manual

3-7. PTZ Controller

The DVR needs to be setup to accept the VKBD3im, VKBD4 or QSC1000 keyboard, as a
default this will be set to the correct Protocol and Baud rate, the ID RS485 Address my need
to be adjusted dependant on the number of PTZ cameras on the system. The Keyboard ID
should not be the same as any of the domes on the system.

3-8. Etc.

Replay Time : The Replay time can be set between 1 and 60minutes. When set and the
play back button is pressed, this is the period that the DVR will step back from the current
time to start replaying.
41