Event - Qtum HD1049 Installation And User Manual

2-3. Event

When an event comes in the DVR records he image according to its settings(Frame menu)
and triggers an alarm(Action).
① Motion On/Off : Specify whether to use motion input or not.
② Motion Sensitivity : Low / Medium / High
③ Motion Area : Define the motion detection area.
To setup the motion detection grid per channel select the "Sel" button
④ Alarm (Sensor)
There are 16 Alarm inputs on the rear of the unit.
Associate each sensor with the camera channels.
⑤ Video Loss : Select a channel to report video loss on.
HD1049 installation and user manual
① ② ③ ④⑤
The detection area is divided into a grid of
11x9(PAL) / 11x8(NTSC) cells. Default is all
cells in active mode.
Use the Left/ right/ up/ down button to move
cursor and the Select key to toggle between
active and inactive.
The mouse can also be used to select cells
and toggle them on and off.
Care must be taken in setting of the motion
sensitivity. It is recommended that each level
is tested to find out which one suits that
particular camera site.
The motion detection is not recommended for
external cameras
30