Modes Of Operation; Power Up Mode; Off And Cool Mode; Manual Mode - SAWTOOTH SPG-410 Operating Manual

MODES OF OPERATION

POWER UP MODE

When power is applied to the system after plugging into an AC outlet, the grill control will display the following:


or showing the current model number for 3 seconds
Once the display identification is complete, the system will recall and reenter the last known mode prior to power
down.

OFF AND COOL MODE

The Off and Cool mode is the normal off state of the control when it has cooled below a safe temperature.
Following shutdown the display will be dark and one LED light will be blinking. Once a cool state is achieved all LED
indicators will be dark. Pressing the On/Off button in this mode will cause the system to enter the Run Mode.

MANUAL MODE

The Sawtooth controller comes with two manual setpoints. These two settings are
manually control the grill with a set auger speed without influence from ambient temperatures.
– Manual smoke mode.
The setting is a manual setpoint. To use the
Wait for the grill to stabilize at 175F. Once grill has stabilized use the temp down arrow button to set the grill to the
setting. Failure to take the grill to 175F before moving to the
setting is a fixed auger speed that will have a consistent pellet feed speed regardless of the ambient temperature.
In hotter weather it will be around the 150F temperature or higher. In colder weather it will allow the user to
smoke at much temperatures below 150F depending on the ambient temperature.
– Manual Grill Mode. This setting will be one step above your highest grill setting of 550deg. Its purpose is
for grilling steaks or chicken at higher temperatures. This setting is more effective with the drip tray removed and
the heat shield in place.
identifies this as a Sawtooth Pellet Grill for 3 seconds
identifies the software version running in this control as Version 1.16
manual mode setting turn the grill on and set temp to 175F.
setting will cause the grill to error. This
pg. 19

and . These will