Digital Controller Operation Summary - SAWTOOTH SPG-410 Operating Manual

Digital Controller Operation
1. Press the power button to start grill
2. Using the Temp Up/Dn buttons set the grill to the desired temp.
3. The grill will begin to produce smoke during startup. This is normal. Keep the lid closed.
4. The igniter will turn off automatically when the grill has cycled through the initial ignition procedure.
NOTE: as a safety feature the grill will shut down if the temp does not reach 150F in the first 30min
5. Run the grill for at least 15 minutes before adjusting the temperature control, to avoid buildup of
unburned pellets in the fire pot.
NOTE: At lower temperatures the fan will cycle on and off. This is normal operation to achieve the
lower temperatures with minimal variation.
CAUTION: If excessive flame is visible i.e. the grease pan is glowing bright red; turn the grill off.
And check for proper assembly once the grill has cooled.
pg. 15