Philips MML1801 Series User Manual page 3

INTRODUCTION
The FIMI Medical Grade MML1801 Medical is a monochrome active matrix, liquid crystal display
exclusively designed for medical imaging applications.
The monitor can be used for X-ray and PACS and other medical systems requiring a very high level
of image quality for examination and control purpose and can accept an analogue signal input as
well as a digital input.
The product is engineered to meet all stringent medical safety requirements, including UL2601.1,
CAN/CSA C22.2 No.601.1, EN-60601.1 and the product can be safely placed next to other sensitive
equipment with no risk of harmful interference.
Certifi cations of monitor also cover requirements for liquid ingress and current-leakage from power
supply.
The typical application is to display high resolution X-ray images.
This product delivers much higher brightness than the standard Flat Panel monitors, equal at least to
the brightness level of current high-end monochrome CRT monitors used for the same applications.
The other key features of the MML1801 are:
- long term luminance stability through backlight stabilization circuit
- luminace stability vs the viewing angle
- contrast stability vs the viewing angle
- brightness uniformity
- automatic brightness control with backlight sensor and ambient light sensor
- internal automatic greyscale calibration (10 bit L.U.T.)
The tilt swivel base can be removed and the monitor uses a mounting plate that conforms to the
VESA mounting standard, that allows fl exible mounting options, including wall mounting and rolling
stands.
3 MML1801