Osd Size; Osd Transparency; Osd Timeout; Video Source - Philips MML1801 Series User Manual

6.5.5 OSD Transparency

1) Press Enter button when the OSD Transparency is highlighted on OSD Settings.
The OSD Transparency bar appears.
2) Press Enter button and Adjust + or Adjust - button to choose the degree of transparency of the OSD image
3) When the position is adjusted, press the Enter button to return to OSD Settings window
4) Select Exit and press again Enter button to return to OSD Main Menu.

6.5.6 OSD Timeout

1) Press Enter button when the OSD Timeout is highlight on OSD Settings.
The OSD Timeout bar appears.
2) Press Enter button and Adjust + or Adjust - button to choose the time of activation of the OSD-Menu.
3) Press the Enter button to confi rm your selection and return to OSD Settings window

6.6.0 Video Source

The ON SCREEN DISPLAY shows the four sources available.
The default is BNC
but you can select:
- DVI (Digital Video Input)
- DSUB (D-sub input Video with separated syncr.).
- DSUB-SOG (D-sub input Video with Syncr. On Green)
1) Press Enter button when the Video Source is highlighted on Main menu.
The Video Source window appears.
2) Press the Adjust + or Adjust - button until the desired source is highlighted.
3) Press the Enter button to confi rm your selection and exit from OSD Main Menu.
(*) see next page
OSD Settings
OSD Position

OSD Size

OSD Transparency
OSD Timeout
Exit
OSD Timeout
10 Sec.
20 Sec.
30 Sec.
45 Sec.
60 Sec.
90 Sec.
120 Sec.
Disabled
(Composite Video with Sync. On Green).
(*)
Video Source
BNC
DVI
DSUB (Ht. and Vt. Sync.)
DSUB-SOG (Green Input)
DSUB (Ht. + Vt. Sync.)
Exit
25 MML1801