Intelliph Installation - Pentair INTELLIpH Installation And User Manual

8
IntellipH Controller Installation
®
The IntellipH Controller is installed "in series" with the IntelliChlor
®
IntelliChlor SCG cell cord plugs into the IntellipH Controller and the IntellipH
®
Controller plugs into the IntelliChlor Power Center, EasyTouch
Systems Load Center power connector.
To install the IntellipH Controller:
1. Choose a location on a wall or vertical surface near the IntelliChlor SCG
power center (P/N 520556) and/or the EasyTouch and IntelliTouch Control
System Load Center. Secure the IntellipH Controller to the surface with the
three screws.
2. WARNING! SWITCH OFF or REMOVE POWER to the IntelliChlor SCG.
3. Remove the IntelliChlor SCG cell cord from the power center, EasyTouch
or IntelliTouch Control System Load Center. Insert the IntelliChlor SCG cell
cord plug into the bottom of the IntellipH Controller.
4. Plug the IntellipH Controller cord into the IntelliChlor SCG Power Center,
IntelliTouch or EasyTouch Control System load center where the IntelliChlor
SCG cell originally was plugged in.
IntelliTouch ,
®
EasyTouch Load
®
Center or
IntellipH
®
Power Center
Attach cable
from IntellipH
®
Canister
INTELLIPH ACID DISPENSER Installation and User's Guide
®
IntellipH Controller
®
Enclosure (bottom view)
IntellipH Controller Installation Diagram
®
or IntelliTouch
®
Attach cable from
IntelliChlor SCG
®
Note: The latest EasyTouch
Load Center includes a built-in transformer
for the IntelliChlor
®
requires an IntelliChlor
SCG. The
®
Control
®
IntellipH
®
Canister
, IntelliTouch
®
SCG, and no longer
Power Center.
®
®