Before First Use - Ninja BL773CO Owner's Manual

Before First Use

PLEASE KEEP THESE IMPORTANT
SAFEGUARDS IN MIND WHEN
USING THE APPLIANCE:
IMPORTANT: Make sure that the motor
base is plugged in for use.
IMPORTANT: Never add ingredients into
the container before placing the Blade
Assembly in first.
IMPORTANT: Blade Assemblies are not
interchangeable.
IMPORTANT: DO NOT attempt to operate
the appliance without the lid on.
IMPORTANT: Never run the appliance
empty.
IMPORTANT: Appliance accessories are
not intended to be used in the microwave
as it may result in damage to the
accessories.
WARNING: Stacked Blade
Assembly is sharp and not
locked in place. If using the
pour spout, ensure the lid is
fully locked onto the blender
pitcher. Failure to do so will
result in a risk of laceration.
WARNING: Stacked
Blade Assembly is sharp
and not locked in place.
If pouring with the lid
removed, carefully remove
the Stacked Blade Assembly
first, holding it by the shaft.
Failure to do so will result in
a risk of laceration.
WARNING: Chopping
Blade Assembly is sharp and
not locked in place. Before
emptying contents carefully
remove lid and Chopping
Blade Assembly, holding it by
the shaft. Failure to do so will result in a
risk of laceration.
CAUTION: Do not immerse the motor base into
water or any other liquid.
1
Remove all packaging material and labels from the
appliance. Separate/remove all parts from each other.
2
Wash the lids, pitcher, bowl, Nutri Ninja
disc, slicing/shredding disc and blade assemblies
in warm, soapy water. When washing the blade
assemblies, use a dish-washing utensil with a handle to
avoid direct hand contact with blades.
WARNING: Handle the Blade Assemblies and the
grating, slicing/shredding discs with care when
washing, as the blades are sharp.
3
Handle blade assemblies with care to avoid contact
with sharp edges. Rinse and air dry thoroughly.
4
The pitcher, bowl, Nutri Ninja cups, lids, grating,
slicing/shredding discs and Blade Assemblies are
all dishwasher safe. It is recommended that the lids,
grating, slicing/shredding discs and Blade Assemblies
be placed on the top rack. Ensure that the Blade
Assemblies and the discs are removed from the
containers before placing in the dishwasher.
5
Wipe the motor base clean with a damp cloth.
cups, grating
®
www.ninjakitchen.com 4