Troubleshooting - Porter-Cable PCX18604P-12A/8101261 Owner's Manual

TROUBLESHOOTING

WARNING!
TO REDUCE THE RISK OF INJURY FROM MOVING PARTS AND/OR ELECTRICAL
SHOCK, TURN POWER SWITCH OFF AND DISCONNECT GROUNDED PLUG
FROM ELECTRICAL OUTLET BEFORE PERFORMING TROUBLESHOOTING
CHECKS.
Minor problems often can be fixed without calling customer service.
PROBLEM POSSIBLE CAUSE
Vacuum will not
run
Loss of suction,
wet pick-up
Loss of suction,
dry pick-up
No electricity
1. Full tank
2. Clogged hose
3. Clogged filter
1. Full tank
2. Clogged hose
3. Clogged filter
CORRECTIVE ACTION
Make sure electrical outlet has voltage
(A qualified electrician may need to be contacted)
1. Drain and clean tank
2. Remove hose and clean debris
3. Clean or replace filter
1. Drain and clean tank
2. Remove hose and clean debris
3. Clean or replace filter
10