System Set-Up - Kenwood TK-8162 Service Manual

SERVICE
This radio is designed for easy servicing. Refer to the
schematic diagrams, printed circuit board views, and align-
ment procedures contained in this manual.
NOTE
If you do not intend to use the 3.5-mm jack for the external
speaker, fit the supplied speaker-jack cap to stop dust and
sand from getting in.

SYSTEM SET-UP

Choose the type of transceiver
Transceiver programming
External speaker
GENERAL / SYSTEM SET-UP
Merchandise received
Connection cable
KES-3
(Option)
KGP-2A
Modem GPS receiver or
KGP-2B
Modem GPS controller
(Option)
Delivery
E,E3
Antenna
connector
X2
Antenna
connector
Frequency range (MHz)
440~470
400~430
470~512
See page 6.
A personal computer (IBM PC or compatible),
programming interface (KPG-46),
and programming software (KPG-99D(E))
are required for programming.
KCT-39
(Option)
KCT-36
Extension cable
(Option)
KDS-100
or Mobile data
terminal
(Option)
TK-8160/8162
External
speaker jack
Power input
connector
External
speaker jack
Power input
connector
RF power Type
25W E
25W E3
25W X2
KCT-18
Ignition sense cable
(Option)
3